6000 watt 8000 watt pure sine wave inverter with solar charger
You are here:Home>>Inverter>>Pure Sine Wave Inverter>>AP Serie
EYEN Website Low Frequency AP Series Pure Sine Wave Solar Panel Inverter
Feature of AP Series Inverter&Charger
- High overload ability of our AP charger is up to 300% rated power(20 sec)
- AP pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to 10W(3s sensing cycle). It can extract max,power from various batteries with different protections, and low voltage trip can be selected (10V/10.5Vor 10.5V/11V).
- Uses PFC(power factor correction) for charger, which has less power consumption than conventional units.
- It has 15s delay before transfer when AC resumes, and overload protection when our AP pure sine wave inverter equips with generator.
- 10ms typical transfer time between battery and AC, which guarantees power continuity of AP charger. Uses selectable input AC voltage (184-253V or 154-253V) for different kinds of loads.
- Our AP charger allows start up and through power with depleted batteries. Its powerful charge rate up to 90Amp.
- It can offer 3-step intelligent battery charging, and equipped with 8 preset battery type selector for totally flat batteries.
- LCD status display, battery/AC priority switch, RS232 communication port are available for our AP pure sine wave inverter, it also has 17 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
On the DC end of inverter, there are 4 DIP switches which enable users to customize the performance of the device.
Switch NO | Switch Function | Position: 0 | Position: 1 |
SW1 | Low Battery Trip Volt | 10.0VDC | 10.5VDC |
SW2 | AC Input Range | 184-253VAC | 154-253VAC |
SW3 | Load Sensing Cycle | NightCharger function | 3 seconds |
Sw4 | Battery/AC Priority | Utility Priority | Battery Priority |
Low Battery Trip Volt:
The Low Battery Trip Volt is set at 10.0 VDC by default.It can be customized to 10.5VDC
AC Input Range:
There are different acceptable AC input ranges for different kinds of loads.
It can be customized from 184-253VAC to 154-253VAC.
Load Sensing Cycle:
The inverter is factory defaulted to detect load for 250ms in every 3 seconds when SW3 setting positionl.
In NIGHT CHARGER position, the inverter will stay in standby mode without sensing loads. It won't output any powereven if a load is turned on when working on battery mode.
AC/Battery Setting:
Our inverter is designed AC priority by default. This means, when AC input is present, the battery will be charged first, and the inverter will transferthe input AC to powerthe load.
The AC Priority and Battery Priority switch is available upon request. When you choose battery priority, the inverter will inverting from battery despite the AC input.
Inverter Output | Model | AP | AP | AP | AP | AP | AP | AP |
1000W | 1500W | 2000W | 3000W | 4000W | 5000W | 6000W | ||
Continuous Output Power | 1000W | 1500W | 2000W | 3000W | 4000W | 5000W | 6000W | |
Surge Rating (20S) | 3000W | 4500W | 6000W | 9000W | 12000W | 15000W | 18000W | |
Capable of Starting Electric Motor | 1HP | 1.5HP | 2HP | 3HP | 4HP | 5HP | 6HP | |
Output Waveform | Pure Sine wave / Same as input (Bypass Mode) | |||||||
Nominal Efficiency | >88% (Peak) | |||||||
Line Mode Efficiency | >95% | |||||||
Power Factor | 0.9-1.0 | |||||||
Nominal Output Voltage rms | 100-110-120Vac / 220-230-240Vac | |||||||
Output Voltage Regulation | ±10% RMS | |||||||
Output Frequency | 50Hz ± 0.3Hz / 60Hz ± 0.3Hz | |||||||
Short Circuit Protection | Yes, Current Limit Function (Fault after 1 sec) | |||||||
Typical transfer Time | 10ms (Max) | |||||||
THD | <10% | |||||||
DC Input | Nominal Input Voltage | 12.0Vdc | ||||||
(*2 for 24Vdc, *4 for 48Vdc) | ||||||||
Minimum Start Voltage | 10.0Vdc | |||||||
Low Battery Alarm | 10.5Vdc/11.0Vdc | |||||||
Low Battery Trip | 10.0Vdc/10.5Vdc | |||||||
High Voltage Alarm & Fault | 16.0Vdc | |||||||
High DC Input Recovery | 15.5Vdc | |||||||
Low Battery voltage recover | 13.0Vdc | |||||||
Idle Consumption- Search Mode | < 25 W when Power Saver On | |||||||
Charger | Input Voltage Range | Wide: 90-135VAC /164-243VAC ; | ||||||
Narraw: 100~135VAC /194-243VAC; | ||||||||
Output Voltage | Depends on battery type | |||||||
Charger Breaker Rating | 10A | 10A | 10A | 20A | 20A | 30A | 30A | |
Max Charge Rate | 35A/ 70-90A Max (Charger Current Control) | |||||||
Over Charge Protection Shutdown | 15.7V for 12Vdc (*2 for 24Vdc, *4 for 48Vdc) | |||||||
Charger curve ( 4 stage constant current ) 4 Step Digital Controlled Progressive Charge | Battery types (*2 for 24Vdc, *4 for 48Vdc) | |||||||
Battery type | Fast Vdc | Float Vdc | ||||||
Gel U.S.A | 14 | 13.7 | ||||||
A.G.M 1 | 14.1 | 13.4 | ||||||
A.G.M 2 | 14.6 | 13.7 | ||||||
Sealed Lead Acid | 14.4 | 13.6 | ||||||
Gel Euro | 14.4 | 13.8 | ||||||
Open Lead Acid | 14.8 | 13.3 | ||||||
Calcium | 15.1 | 13.6 | ||||||
De-sulphation | 15.5 for 4hrs | |||||||
Remote Control | Yes. Optional | |||||||
Bypass & Protection | Input Voltage Waveform | Sine wave (Grid or Generator) | ||||||
Nominal Voltage | 120Vac | 230Vac | ||||||
Low Voltage Trip | 80V/90V±4% | 184V/154V±4°/O | ||||||
Low Voltage re engage | 90V/100V±4% | 194V/164V±4% | ||||||
High Voltage Trip | 140V±4% | 253V±4% | ||||||
High Voltage re engage | 135V±4% | 243V±4% | ||||||
Max Input AC Voltage | 1S0VAC | 270VAC | ||||||
Nominal Input Frequency | 50Hz or 60Hz (Auto detect) | |||||||
Low Freq Trip | 47±0.3Hzfor50Hz, 57±0.3Hzfor 60Hz | |||||||
Low Freq re engage | 48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz | |||||||
High Freq Trip | 55±0.3Hzfor 50Hz, 65±0.3Hzfor 60Hz | |||||||
High Freq re engage | 54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz | |||||||
Output Short circuit protection | Circuit breaker | |||||||
Bypass breaker rating | 10A | 15A | 20A | 30A | 30A | 40A | 40A | |
Transfer switch rating | 30ampfbrUL&TUV | 270VAC | ||||||
Max bypass current | 30amp | 40amp | ||||||
Mechanical Specification | Mounting | Wall mount | ||||||
Inverter Dimension3(L*W*H) | 382*218*179mm | 442*218*179mm | 598*218*179mm | |||||
Inverter Weight | 16KG | 17KG | 20KG | 24KG | 35KG | 45KG | 45KG | |
Shipping Dimensions(L*W*H) | 520*315*300mm | 580*315*300mm | 740*315*300mm | |||||
Shipping Weight | 18KG | 19KG | 22KG | 26KG | 37KG | 47KG | 47KG | |
Display | Status LEDs / Status LEDs+LCD | |||||||
Standard Warranty | 1 Year | |||||||
Packing: cartons shall be used for small items while the wooden crates for big ones
Delivery:20 days after receiving payment( it's negotiable based on the specific order quantity)
1.We have more than 10 years' experience in foreign trade service.
2.YIYEN/YIY would like to provide OEM/ODM Services to customers via the following ways.
Design for special packing
We could provide the packing design service according to customers' instruction and our experience,including
design of printed inner box and carton.
So working with YIYEN/YIY ,no need to worry the design.
•inner box
•carton
Products printing and logo OEM
Most of customers want to develop their own printing or put the logo on the products it's no problem
for
YIYEN/YIY,because we have professional designers working in our factory.
•adhesive labels
•printing logo
Smaller orders are available
YIYEN/YIY always prepare some stocks for hot selling products, so that meet the purchase requirement of
smaller order from customers,because we would like to help them grow up at the beginning of business.
And some customers trial order,in order to keep more and more business each other in future.
3.During the warranty, any defective product will get repaired or replaced for free.
4.We have our own R&D team and Quality Control System which can guarantee the goods with good quality
and advanced technology.
5.Don't hesitate to send inquiry to us when you see our products, we will do our best to reply as soon as
possible and help you get more profit here.
6.In 2016, the Rate of Punctual Delivery is 98%.
Q 1.What's the payment term?
A.We accept TT,30% deposit and 70% balance agaisnt copy of BL.
Q 2.How's the delivery time ?
A.Usually it will take about 25 days for production.
Q 3.Tell me the standard of package?
A.For the small capacity,it use carton,but for big capacity,we should use strong wooden case for protection.
Q 4.What kind of material of transformer?
A.We have two types, one 100% copper and the other is copper with aluminum.It depends on your requirment.
In fact,those two have no difference if normal work well. Only except the longlife. Copper is better and also higer price.
Q 5.Could you offer Form A or C/O ?
A.It totally not a problem. We can prepare relative documents to forgin affairs office or other office to apply for this certificate.
Q 6.Would you accept to use our logo ?
A.If you have good quantity,it absolute no problem to do OEM.
Q 7.We want to know month capacity.
A.It depends on which model.For example for relay type small capacity,month capacity can reach near 20000pcs and big capacity near 3000pcs.
Q 8.Where is your market?
A.Our products are popular in russia, indonisia, Philippines,italy, america, pakistan and so on.Some of them are our regular customers and some of them are developing.
We hope you can join us and make mutural benifit from our cooperation.
Q 9.Does the inverter connect with solar system ?
A.Yes.Because of the unique feature which combine invert,charge and AC auto-transfer switch into one complete system,
made inverter not only connect with solar system,also could be used in& officer equipment, household items,power tools ans etc.
Q 10.What kind of certificate you have ?
A.Our company already achieve ISO, CCC, and for products, we have CE, SONCAP, GOST, UL(pending) .
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier