Small 8 Channel 5V50mA Lithium ion Coin Cell Battery Voltage Capacity Checker Tester Meter
5V10mA Lithium Battery Cell Discharge Capacity Tester Analyzer With 8 Channel
1. TOB-5V10mA Button Battery Tester is an eight-channel battery analyzer to analyze small coin cells with a range current 0-10mah, voltage 0-5v. Each channel of the analyzer has independent constant-current and constant-voltage source, which can be programmed and controlled by computer software.
2. This Button Battery Tester provide most applications in battery testing fields such as electrode materials research, battery performance test, small scale battery formation, capability grading, battery pack testing, etc.
3. The Button Battery Tester is suitable for all kinds of coin cell battery such as lithium battery, NI-MH battery, Zn-Mn watch battery and so on.
Model | TOB-CT-4008-5V10mA-164 | |
Voltage | AC 220V ±10%, 50Hz | |
Resolution | AD: 16bit DA: 16bit | |
Input Resistance | ≥1 GΩ | |
Input Power | 25W | |
Voltage | Constant Voltage Range | 25mV-5V |
Discharge Min Voltage | -5V | |
Accuracy | ± 0.05% of FS | |
Stability | ± 0.05% of FS | |
Current | Per Channel Current Range | Range 1: 5uA-1mA, Range 2: 1mA-5mA, Range 3: 5mA-10mA |
Accuracy | ± 0.05% of FS | |
Constant voltage cutoff current | Range 1: 2uA, Range 2: 0.01mA, Range 3: 0.02mA | |
Stability | ± 0.05% of FS | |
Power | Per Channel Output Power | 0.05W |
Stability | ± 0.1% of FS | |
Time | Current Response Time | <500us (10%FS-90%FS) |
Step Time Range | ≤(365*24 )hour/step, Time Form Support 00 : 00 : 00 : 00 (h min s ms) | |
Data Recording | Record Condition | Minimum Time Interval: 100ms |
Minimum Voltage Interval: 10mV | ||
Minimum Current Interval Range 1: 2uA, Range 2: 0.01mA, Range 3: 0.02mA | ||
Record Frequency | 10Hz | |
Charge | Charge Mode | Constant Current Charge, Constant Voltage Charge, Constant Current and Constant Voltage Charge, CPC |
End Conditon | Voltage, current, relative time, capacity, -ΔV | |
Discharge | Discharge Mode | CCD, CPD, CRD, CVD, Constant Current and Constant Voltage Discharge |
End Condition | Voltage, Current, Relative Time, Capacity, -ΔV | |
Pulse | Charge | CCC, CPC |
Discharge | CCD, CPC | |
Min Pulse Width | 500ms | |
Pulse number | A single pulse step supports 32 different pulses | |
Automated Switch | Automated swith from charge to discharge for each pulse | |
End Condition | Voltage, Test Time | |
Cycle | Loop Measure Range | 1~65535 times |
Max Steps Per Loop | 254 | |
Nested Loop | Nested loop Function, Max Support 3 Layers | |
Protection | Software Protection | Power-down Data Protection |
Off-line Testing Function | ||
Setting Protection Condition, Setting Parameter: Low Voltage limit, Upper Voltage limit, Low Current limit, Upper Current limit, Delay Time | ||
Hardware Protection | Additional Anti-reverse Protection Model | |
Channel Features | Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure | |
Channel Control Mode | Independent Control | |
DCIR testing | Support | |
Voltage and Current Testing Sample | 4-wire connecting | |
Noise | <45dB | |
Database | MySQL Database | |
A Means of Communication of Upper Machine | TCP/IP Protocol | |
Data Output | EXCEL,TXT,Graph | |
Communication Interface | Ethernet Port | |
Per Unit Main Channels No. | 8 | |
Dimensions | 250*200*60(mm) |
With software connect with computer to analyze all test data easily
You May Also Like
1.5V6A Tester for both cylinderical and pouch cell
2.All Equipment and Raw Material for Make Coin Cell