1.Calibrated Measures & Volumetric Provers
2.Built to NIST Handbook 105-3 Standards, OIML R-120 and API Manual of Petroleum Measurement Chapter 4
3.Manufactured of Series 304 Stainless Steel, which resists ordinary rusting, can be easily cleaned, resists organic chemicals, no
slag and requires no internal coating. Series 316 stainless steel is available upon request
4.Calibration By Standards Traceable to National Institute of Standards and Technology
5.Graduated Neck with scale that is sealed
6.A butterfly valve is standard with the drain at the center point. This is the most versatile unit for use in the field whether emptying into tank, using a pump or gravity discharge. A ball valve is optional. It is used mostly in laboratory applications or where special application exists. The drain would then proceed at a 7 degree decline with the ball valve near the perimeter of the prover
Welcome to TradeChina
5L Thick neck Stainless Steel Oil Petrol Measuring Can for Export
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Products Description
stainless steel dispenser fuel Measuring can
Materials: SS304
Volume: 1,2,3,5,10,20,50L
Provers are the necessity in the gas station for metering the liquid. it is composed of:
Bleed lines are required (instead of bleed valves) on all new provers where air may be entrapped in the dry break coupler and lines going to it.
The level condition of volumetric field standards must be determined by using levels to plumb the neck rather than depending on the top of the neck to be level. The levels on volumetric field standards will be adjusted to agree with this level condition.
Values in the four tables have been updated and the minor scale division (subdivision) is defined as the neck uniformity
tolerance.
Materials: SS304
Volume: 1,2,3,5,10,20,50L
Provers are the necessity in the gas station for metering the liquid. it is composed of:
Bleed lines are required (instead of bleed valves) on all new provers where air may be entrapped in the dry break coupler and lines going to it.
The level condition of volumetric field standards must be determined by using levels to plumb the neck rather than depending on the top of the neck to be level. The levels on volumetric field standards will be adjusted to agree with this level condition.
Values in the four tables have been updated and the minor scale division (subdivision) is defined as the neck uniformity
tolerance.
Size (gal) | Minimum Metal Thickness* (in) | Maximum Upper Neck ID ** (in) | Gauge Tube ID (in) | Minimum Top Cone Pitch | Minimum Bottom Cone Pitch | Drain Size Min/Max (inches) |
1 | 0.0312 | 2.25 | 0.5 | 35° | -- | ---/--- |
5 | 0.0312 | 3 | 0.5 | 35° | 20° | 1.5 / 2.25 |
10 | 0.0312 | 4 | 0.5 | 35° | 20° | 1.5 / 2.25 |
25 | 0.109 | 5 | 0.625 | 25° | 20° | 1.5 / 2.25 |
50 | 0.109 | 5 | 0.625 | 25° | 20° | 1.5 / 2.25 |
description of measuring can
Size Declaration
Nominal volumes in each system are ideally selected in multiples of 1, 2, and 5 (liters or gallons) to facilitate calibration.
However, a prover may be built to any size to meet specific needs. Non-standard size volumetric field standards that comply with
all other requirements shall be considered to be in full compliance with this standard.
The temperature at which test measures and provers are referenced during calibration and during use for testing petroleum products
is generally 15.56 °C (60 °F). International standards reference petroleum products to 15 °C. Provers may be used for applications
other than petroleum products or in areas where a different reference temperature is used for petroleum products. In such cases,
the appropriate reference temperature for the application should be identified and used. For example, the reference temperature
for provers used in testing milk is 4.44 °C (40 °F).
However, a prover may be built to any size to meet specific needs. Non-standard size volumetric field standards that comply with
all other requirements shall be considered to be in full compliance with this standard.
The temperature at which test measures and provers are referenced during calibration and during use for testing petroleum products
is generally 15.56 °C (60 °F). International standards reference petroleum products to 15 °C. Provers may be used for applications
other than petroleum products or in areas where a different reference temperature is used for petroleum products. In such cases,
the appropriate reference temperature for the application should be identified and used. For example, the reference temperature
for provers used in testing milk is 4.44 °C (40 °F).
Related Products
Company Profile
Our factory
Station energy technology Co.,LTD is a professional manufacturer of petroleum machinery equipment. Which integrates scientific research, manufacture, sales and service. Main products is Fuel dispenser, Portable fuel station, Red Jacket submersible pump,Automatic tank gauge, Double-wall tank and pipe leakage detection products, Fuel filters, Fuel nozzles, Hose assembly, Flow meters and other spare parts for fuel station.
We have competitive price with high quality product. Our aim is to build the whole industry supply chain of the oil industry to meet the one-stop purchasing needs of users.
We have competitive price with high quality product. Our aim is to build the whole industry supply chain of the oil industry to meet the one-stop purchasing needs of users.
Packaging & Shipping
Contact Us
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier