U530TS | Unit | A | B | C | ||||
INJECTION UNIT | ||||||||
SCREW DIAMETER | mm | 80 | 85 | 90 | ||||
SCREW L/D RATIO | L/D | 23.4 | 22 | 20.8 | ||||
SHOT VOLUME(THEORETICAL) | cm3 | 1964.7 | 2218 | 2486.6 | ||||
INJECTION PRESSURE | Mpa | 168 | 148.8 | 132.7 | ||||
SCREW SPEED | rpm | 152 | ||||||
SHOT WEIGHT(THEORETICAL)(PS) | g | 1788 | 2018 | 2263 | ||||
SHOT WEIGHT(THEORETICAL)(PS) | oz | 63.07 | 71.183 | 79.825 | ||||
CLAMPING UNIT | ||||||||
CLAMPING FORCE | Kn | 5300 | ||||||
OPEN STROKE | mm | 775 | ||||||
SPACE BETWEEN TIE BARS(W*H) | mm | 820*800 | ||||||
MAX.MOULD HEIGHT | mm | 800 | ||||||
MIN.MOULD HEIGHT | mm | 290 | ||||||
EJECTOR STROKE | mm | 225 | ||||||
EJECTOR FORCE | Kn | 152 | ||||||
EJECTOR NUMBER | 12+1 | |||||||
DIE HOLE DIAMETER | mm | 200 | ||||||
OTHERS | ||||||||
SYSTERM PRESSURE | Mpa | 16 | ||||||
MOTOR POWER | Kw | 45 | ||||||
HEATING POWER | Kw | 38.3 | ||||||
OIL TANK CUBAGE | L | 900 | ||||||
MACHINE WEIGHT | Ton | 20 | ||||||
BOUNDARY DIMENSION(L*W*H) | m | 7.8*2.3*2.7 | ||||||
SERVO DRIVER CAPACITY | Kw | 22+45 |