Description:
Part no: 521-0001-177
Part name: Printhead valve ,valve V11 V12
Compatible to:Willett Videojet 400 sereis cij printer
Methods of delivery:by DHL,FEDEX,TNT,EMS,UPS
Delivery time:within 3 days after payment
Top Moulding, Keypad and LCD | |
1-5 | 1 through 5 378297-07 Kit, door and keypad, Russian 1 |
378297-10 Kit, door and keypad, Chinese | |
378297-101 Kit, door and keypad, UK/USA | |
378297-102 Kit, door and keypad, European | |
378297-103 Kit, door and keypad, Turk/Scandinavian | |
378297-105 Kit, door and keypad, Katakana | |
378297-107 Kit, door and keypad, Bulgarian | |
378297-108 Kit, door and keypad, East European | |
378297-11 Kit, door and keypad, Arabic | |
378297-115 Kit, door and keypad, Farsi | |
378297-12 Kit, door and keypad, Korean | |
378297-13 Kit, door and keypad, Thai | |
378297-19 Kit, door and keypad, Greek | |
378297-20 Kit, door and keypad, Hebrew | |
378297-23 Kit, door and keypad, Polish | |
1 | Keypad bezel |
2 | Keypad overlay |
3 | Keypad circuit assy. |
4 | Electronics compartment door |
5 | 100-043S-148 Gasket - top door |
6 | 378336 Backlight Inverter |
7 | 100-043S-175 Keypad harness |
8 | 100-043S-190 Display panel cover |
9 | 500-0085-140 LCD Panel |
10 | 100-043S-159 Keypad/LCD ribbon cable |
Connector Panel | |
1 | 100-043S-160 Switch LED Cable |
2 | 100-043S-210 Switch Cable Assembly |
3 | 500-0097-128 Mains Power Filter |
4 | 100-043S-172 Mains Filter Ground Wire |
5 | 100-043S-170 Mains cable assembly (International) , 217019 Mains cable assembly (US) |
6 | 100-043S-130 Shaft encoder cable (with port) |
7 | 100-043S-128 RS-232 cable (with port) |
8 | 500-0076-133 Blanking plug, 18mm |
9 | 500-0076-134 Blanking plug, 14mm |
10 | 100-043S-129 Photo Cell Cable |
11 | 500-0082-158 Switch |
Electronics Compartment | |
1 | 200-0390-102 PSU |
2 | 200-043S-166 CPU board |
3 | 200-043S-145 Fan filter assembly |
4 | 200-0390-239 EHT module |
5 | 100-043S-158 EHT cable assembly |
6 | 200-043S-147 Thumb knob |
7 | flash memory chips |
8 | 200-0430-160 I/O board |
9 | 200-0430-161 Ink pump motor driver board |
10 | 100-043S-137 Main Harness |
11 | 100-043S-164 Gland plate gasket |
12 | 100-043S-211 Fan assembly |
13 | 200-0390-119 Fan fail PCB |
14 | 200-043S-148 Fan grill assembly |
15 | 100-043S-176 Power harness |
Printhead Assembly | |
1 | 100-0370-196 Front cover |
2 | 100-0370-231 Lid switch thumbscrew |
3 | 200-3900-135 Charge electrode/LED assembly |
4 | 200-0430-141 Nozzle assembly, 60 micron |
5 | 100-0430-155 Insert, lid switch |
6 | 200-0390-235 Cover switch assy. |
7 | 200-0430-162 Head heater manifold |
8 | 521-0001-177 Pico valve |
9 | 500-0031-180 O-ring 25.81 x 3.53 CS |
10 | 100-0370-231 M2 5 x 6 cask head st. st. screw |
11 | part of 200-043S-207 Umbilical |
12 | 100-0370-195 Rear cover |
13 | 200-3900-298 Phase detector assy. |
14 | 200-0430-131 EHT block assy. |
NI | 522-0080-226 22 meg EHT resistor (inside EHT block) |
16 | 100-0470-273 Ground plate, EHT (0 V) |
17 | 100-0430-115 Last chance filter |
18 | 500-0122-125 Compression spring |
NI | 200-043S-207 Printhead assembly (includes items 3, 5 through 9, 11, 13, 14 and 15) |
FMS platform | |
1 | 100-0370-102 VMS restrictor block between V3 and FMS |
2 | 204-0336-101 Venturi assembly |
3 | 200-043S-244 FMS assembly |
378269 Mixer tank sensor kit (43s only) includes all 5 sensors | |
4 | 378277-03 Flush pump tube connector (red) includes gripper |
5 | 500-0031-234 6.07 x 1.78 O-ring |
6 | 500-0034-110 Non return valve |
7 | 500-0047-133 Pressure damper |
8 | 500-0041-296 Jaco nut |
9 | 200-0430-146 Flush pump assembly |
NI | 100-0430-114 Flush pump diaphragm 1 inside flush pump |
10 | 378277-01 Flush pump tube connector (black) includes gripper |
NI | 378277-02 Flush pump tube connector (green) on left side of flush pump, |
includes gripper | |
11 | 500-0047-131 Pre-pump filter, 30 micron |
12 | 500-0047-134 inline filter, 8 micron use this part for both prehead |
filter and flush filter | |
13 | 500-0041-110 Festo tee |
14 | 500-0047-130 Main ink system filter, 5 micron |
15 | 100-0370-200 System manifold |
16 | 500-0031-175 4.47 x 1.78 O-ring |
17 | 378254 Pressure transducer (43s only) includes both O-rings |
18 | 500-0031-164 Pressure transducer front O-ring |
19 | 500-0031-201 Pressure transducer rear O-ring |
20 | 100-0370-112 Printhead manifold |
21 | 500-0031-117 1.78 x 1.78 O-ring |
22 | 521-0001-174 Solenoid Valve, 3-port (Valves V3 and V7) white base |
23 | 521-0001-175 Solenoid Valve, 3-port (V8) black base |
24 | 521-0001-173 Solenoid Valve, 2-port (Valves V1, V2 and V6) |
V1 and V2 are shown on page 12-19. | |
NI | 500-0031-231 Valve O-rings (20 pack) |
NI | 204-0346-101 75 micron VMS filter (10 pack) 1 tiny white filter in FMS |
Ink Bottles and Ink System Pump | |
1 | 200-0390-108 Pump |
2 | 100-0470-198 Pump seal gasket |
3 | 500-0031-249 O-ring (15.6/1.78) |
4 | 100-043S-180 Down tube |
5 | 500-0041-194 Jaco 1/8” tee |
6 | 500-0031-250 O-ring (20.4/1.78) |
7 | 100-043S-179 2x down tube adapter |
8 | 500-0031-251 O-ring (14.0/1.78) |
9-14 | 200-043S-250 Ink system kit |
9 | 200-0466-143 Level detect assembly |
10 | 100-0370-159 Level detect seal |
11 | 100-0466-144 Ink tank manifold |
12 | 100-043S-189 Solvent tank manifold |
13 | 100-0430-139 Manifold gasket |
14 | 100-0470-118 Solvent/ink tank |
NI | NI 501-0002-101 1/8” tube, clear |
NI | NI 501-0002-114 1/8” tube, green stripe |
NI | NI 501-0002-113 1/8” tube, black stripe |
NI | NI 501-0002-115 1/8” tube, yellow stripe |
NI | NI 501-0002-131 6mm x 4mm PTFE tubing |
Ink filler caps | |
1 | 100-0470-191 Filler housing, ink |
2 | 500-0031-241 O-ring (53.64/2.62) |
3 | 100-0470-195 Cap retainer black |
4 | 100-043S-194 Ink cap |
5 | 500-0031-232 O-ring (45.69/2.62) |
6 | 100-0470-308 Cap retainer white |
7 | 100-043S-195 Top-up cap |
8 | 100-0470-192 Filler housing, top-up |
9 | 100-043S-188 Housing plate gasket |
10 | 100-043S-181 Housing plate |
11 | 100-043S-191 Housing nut |