5~1000 ml/min 0.1% Accuracy Furnace Oil Piston Flow Meter
The piston flow meter is a kind of micro flow meter.It's min flow is 0.5ml/min.
We focus on micro flow industry(liquid and gas).It used for oil hydraulic oil,water,glue.etc...The oval gear flow meter material is stainless steel 316L and Aluminium for different applications.Cooperate with DC8S display instrument to get a dosing system(also with digital display and alarm).
Medium | Suitable for liquid,weak corrosive chemical liquid,eg:water;oil;glue... |
Accuracy | Standard type is 0.5% |
Pressure | 32Bar and customized high pressure |
Temperature | -30~80℃,Max temperature is 120℃ |
Output | Pulse output |
Power | 4-26VDC power supply |
SS Series__ | |
Material | Body:SS316L |
Gear:SS316L | |
Bear:SS316L | |
Medium | Suitable for water and corrosive medium |
AL Series__ | |
Material | Body:Aluminium |
Gear:Aluminium | |
Bear:SS316L | |
Medium | Non-corrosive liquid,oil;glue |
Model | Flow Range | Connection | K factor |
CX-M2 | 0.5~150 ml/min | G1/8'' Female thread | 0.06 ml/p |
CX-M3 | 3-300 ml/min | G1/8'' Female thread | 0.14 ml/p |
CX-M5 | 5-1000 ml/min | G1/8'' Female thread | 0.36 ml/p |
CX-M6 | 0.5-100 L/h | G1/4'' Female thread | 1 ml/p |
CX-M9 | 6-600 L/h | G1/4'' Female thread | 5 ml/p |
CX-M12 | 0.3-30 L/min | G1/2'' Female thread | 17.5 ml/p |
CX-M5.1 | 1-800 ml/min | G1/8'' Female thread | 0.3 ml/p |
MODEL/SIZE | M2 M3 M5 | M2 M3 M5(high pressure) | M6 | M9 | M12 |
A | 30 | 30 | 40 | 47 | 56 |
B | 62 | 62 | 72 | 79 | 91 |
C | G1/8'' | G1/8'' | G1/4'' | G1/4'' | G1/2'' |
D | 40 | 50 | 50 | 60 | 85 |
E | M5*31 | M5*31 | M5*40 | M5*52 | M5*72 |
1. G Series Micro Flow meter(Positive gear)
The G series piston flow meter is positive gear type flow meter,It with more higher resolution,The min pulse factor is 0.015ml/p and for high viscosity medium,,the performance is better than M series micro flow meter.
The G series flow meter is Ball or PEEK bear,It's flow ratio is 1:500....(CLICK IT↓)
1. P Series Micro Flow meter(pps corrosive)
The P series furnace oil flow meter is suitable for corrosive liquid,the material is PPS(gear,bear,body).Min flow is 1 ml/min; FLOW RANGE:1-100;3-300;5-500;10-1000;50-5000(ml/min)(CLICK IT↓)
The furnace oil flow meter most used for fuel oil,and hydraulic oil ,hydraulic system .it with widly applications,Beacuse of it can test the min flow for liquid(Min:0.5ml/min),It used for more test and control system.
It more used for Common rail inject test bench;Dispenser;glue;oil;hydraulic oil system for leak;Dosing system(with DC8S) and Customized for high pressure and high temperature...
In this years,Our piston flow meter,Get more positive feedback from market and clients.We have more clients from all over the world,Usually,our clients come to our office in SHANGHAI.We thank for your trust and give us many positice suggestions to improve the performance of micro flow meter...We believe we could provide the better service for you...
For the furnace oil flow meter,The good performance based on the best installation and technical setting.So plz check the details careful Tks...