5000 liter double cabin water foam fire truck for Africa Nigeria

Complete Vehicle Parameter

Vehicle

DONGFENG water and foam fire truck

Overall dimension (mm)

8550×2470×3400

Water tank (L)

4000

Foam tank (L)

1000

Gross vehicle weight (kg)

Appro × 16000

Curb weight (kg)

Appro × 9870

Loading (kg)

Appro × 6000

Wheel base (mm)

4500

Max speed (km/h)

80

Standard configuration

1. Firefighting water tank 4m3, foam tank 2m3.

2. Water tank material is carbon steel.

3. Fire pump model CB10/40.

4. Fire cannon model PS40.

5. Sandwich power take-off.

6. 12V, 60W fire lights on the cabin roof.

7. Full set of fire fighting equipment.

Chassis Parameter

Cabin

Double cabin,no air conditioner, cabin roof warning light, left hand drive, 2+4 passengers

Drive form

4×2

Engine

Brand : CUMMINS

Model : B190 33, 190hp,diesel

Type : 6 cylinder, turbocharged, inter-cooled.

Displacement : 5900ml

Emission standard : Euro 3

Transmission

6 forward,1 reverse, manual operated

Tire

10.00R20

No.of tire

6pcs with a spare tire

Superstructure Parameter

Fire pump

1. Type: CB10/40, normal pressure fire pump

2. Flow: 40L/s

3. Pressure: Atmospheric pressure 1.0MPa

4. Drainage time: ≤30s (absorbing depth 7m)

Fire cannon

1. Model : PS40

2. Pressure: 1 ~ 1.2MPa

3. Flow: 40L/S

4. Range: ≥50m

5. Rotary angle: horizontal 360°,

     pitching -30°to 80°

6. Operation : manual operated

Power take off

1. Type: sandwich type

2. Operation: solenoid valve control

3. Cooling method: forced adjustable water cooling.

4. Lubrication method: splash oil lubrication.

Pipeline system

1. Interior water inlet pipe: equipped with a backward way water pipe dia 100mm, and a manual butterfly valve dia 100mm.

2. External water inlet pipe: on both sides of the pump is Φ100mm outer water pipe; two-way water diversion on both sides of the pump, suction pipe Φ100×2m (4pcs).

3. Water discharge pipe: 2 Φ65mm ball valves control the atmospheric outlet, 1 Φ80mm gun pipe and control with Φ80mm ball valve.

4. Φ50mm water injection pipe, water can be directly injected into the tank through the water pump.

5. Φ65mm external water inlet on both sides

6. In order to protect the pump and each ball valve, a residual water valve is installed at the lowest point of the pipeline.

7. In order to enable the power take-off to handle various complicated conditions during work, it is equipped with a cooling water line and a stainless steel ball valve.

Tool and pump store house

(1) Material : high quality steel skeleton,mask checkered aluminum oxide bonding structure.

(2) Structure : all steel welded frame structure,three sides aluminum alloy doors,on both sides have flip slip pedals.