5 um melt blown pp sediment filter cartridge for water treatment
100% polypropylene |
| ||||||||||||||||||
High dirt holding capacity | Depth filtration, high dirt holding capacity | ||||||||||||||||||
Many connections are available | Cut Ends; 226/FIN; 222/FIN | ||||||||||||||||||
Wide Chemical compatability | Can be used in the solvent which PH value is from 1 to 13 | ||||||||||||||||||
Effective Filtration Area | 0.40M2 per 10" | ||||||||||||||||||
Materials
| Filter Media: Polypropylene / Cotton/Glass fiber | ||||||||||||||||||
Inner core: Polypropylene or Stainless Steel | |||||||||||||||||||
Cartridge Dimensions (Nominal)
| Outer Diameter: 63mm (2.5") / 114mm (4.5") | ||||||||||||||||||
Inner Diameter: 28mm (1.10") | |||||||||||||||||||
Length: 10"- 254mm | |||||||||||||||||||
20"- 508mm | |||||||||||||||||||
30"-762 mm | |||||||||||||||||||
40"- 1016mm * (Length is based on Cut Ends) | |||||||||||||||||||
Cartridge Purity | Free of surfactants, resins, binders and adhesives | ||||||||||||||||||
Table 1:Typical air flow rate (10") |
| ||||||||||||||||||
Typical Applications
| Prefiltration in process water treatment industry; | ||||||||||||||||||
Clarification for waste water treatment; | |||||||||||||||||||
Prefiltration before R O system in electronics process water; | |||||||||||||||||||
Organic solvents, inks, plating solution, metal cutting fluids, photoresist filtration | |||||||||||||||||||
Table 2:Liquid Retention Ratings(um) Test |
| ||||||||||||||||||
Operating Conditions
| Normal Operating Temperature: Up to 50℃ (122℉) | ||||||||||||||||||
Max.Operating TeCPerature: 80℃ (149℉)at P≤1.0 bar (14psi) | |||||||||||||||||||
Max. Differential Pressure: Normal Flow direction 4.0 bar (58 psi) at 25℃ (77℉); | |||||||||||||||||||
Reverse flow direction 2.0 bar (29 psi) at 25℃ (77℉). | |||||||||||||||||||
PH Value coCPatibility: 1-13 | |||||||||||||||||||
Sterilization | Not recommended |
ORDER INFORMATION
PRODUCT | MICRON | Outer Dia. | ADAPTER | LENGTH | O-RING / GASKET | |
CP | 100-1um | D63-63mm(2.5") | AA- CUT ENDS (NIL) | 10-10" | S-silicone; N-nitrile | |
500-5um | D114-114mm(4.5") | BN-222/ FIN | 20-20" | E-epdm ; V- viton | ||
1000-10um | CN-226/ FIN | 30-30" | ||||
2000-20um | 40-40" | How to Order?- Example | ||||
Other-XX | Micron:1um; Outer Dia:63mm; Adapter: NIL; Length: 10" | |||||
Selection Code is: CP100D63AA10 | ||||||
1,24-hour Response
We responds any request from our clients within 24 hours, saving your time and labor.
2,Supporting System
The system consists of claims systems, technical support system, inquiry system and ordering following system. The system will provide after-sales service in full range.
3,Free Training
We provide free training to all of our clients and distributors. The training will give you ample knowledge of our product, and make it easy for your work.
4,Free Storage Area
We are providing free storage area to our client,to achieve mix loading purposes.
1 How can we get the quotation of flter cartridges
Kindly please let us know the specifications,such as the material,length,micron,adapter,apply in which industry.....
2What's the minimal quantity requested?
We do not the requirement on teh minimal demand.Thank you.
3How long about your delivery ?
The order is always arranged in 10 working days as soon as receiving the deposit or payment
Sales Engineer : Nina Liu
Whats app:+86 18356516590
EMail:lyy(at)tsjmlc.com
Best wishes!