Number of Control Axes | 3, 4 ,5 Axes (X, Y, Z, A) |
Minimum Command Unit | 0.001mm |
Maximum Coordinate Range | ± 99999.999mm |
Maximum Rapid Traverse Speed | 60m / min |
Feeding Speed | 0.001-15m / min |
Interpolation Types | Linear , Circular, Helical |
Tool offset | Length compensation, Nose radius C compensation |
Spindle Functions | Gear, Dual analog control, Rigid tapping |
MPG Functions | Axis,Speed options, E-stop , Enable Buttons |
Screen saver Function | Screen saver function |
Communication Function | RS232, U disk interface |
Compensation Function | Tool compensation, Wear compensation, Ballscrew pitch compensation, Radius compensation |
Program Editing | Metric/Inch, Relative / Absolute programming |
Limit Function | Software limit, hardware limit |
Pre-reading function | Short line preprocessing 10,000 lines |
Password Protection | multi-level password protection |
Input and output | 32 Input , 32 Output |
PLC programming | PLC ladder ,editable |
Spindle Encoder | Support |
User Macro Program | A Type Macro |
Electronic Gear Ratio | 1 ~ 65536 |
Addtional Panel | A-type panel with hand wheel; B band switch |
Applicable machine tools | milling machine, boring machine, drilling machine,VMC |