5 SMS/5 Calls 8 Wires 3 phase power failure alarm Solar Industry Power Transformer Security power failure gsm sms alarm
Following are the specific functions:
1.Can connect external industrial camera, this system with own SMS, MMS, Email functions
2.8 wired zones,open/closed alarm mode is optional by self-programming
3.Support ISO 6.0 & Andriod APP control function
4.Fixed code: 40 wireless zones,315/433MHz(optional)
5.Digital inputs are adopted optical-coupled isolators, which can prevent external high voltage from destroying internal components.
6.Send SMS automatically to report the state of digital input when it returns normal status.
7.Wireless keyboard for setting phone No.
8.Arm/disarm remotely through GSM SMS.
9.Modify zone content (Chinese 70 words, English 140 letters )
10.Send SMS to 5 preset mobile phone numbers while alarming
11.Auto-dial 5 preset phone numbers while alarming and monitor the sound at site.
12.Record function: Maximum recording time:1 min
13.Voice function: support play the user record voice
14.With wired Mic interface and siren interface
15.Inquiry host’s status and alarm events through SMS
16.Inquiry zones’ name and arm/disarm status through SMS
17.Digital inputs are adopted cal-coupled isolators, which can prevent external high voltage from destroying internal.
18.GSM network wireless communication for alarm, no PSTN cable, not fear cable cut
19.Temper device: Arming while the control panel removing or shaking.
20.Connect with alarm center through GSM network
21.With ROHS/CE/FCC certifications, conform to 3C safety standard and GB12663-2001 government standard
Main technical parameters
1.GSM frequency band:850/900/1800/1900MHZ(quad band)
2.Fixed code wireless signal frequency:315MHz/433MHz
3.Wireless distance: 100-200m
Response time≤8s(GSM network normal)
4. Fixed code zones:40
5.Working conditions:Operating temperature:-45~+60℃
Humidity ≤95% no condensation
6. Standby current :5mA
7. Alarm current: <500mA
8. Standby power consumption:< 0.3W
9. Alarm consumption:< 1-2W
10. Adapter voltage:AC100- 240V 50Hz/60Hz.
Output voltage: DC12V / 2A
Standby battery:DC7.4V/1200mA
Standby battery working hours≥48 hours
11. Size:260mm(Length)×180mm(Width)×120mm(High)
Gross weight:3.5Kg Net weight: 2.5Kg
Remote controller
Power supply:DC12V(Build-in 12V dry battery)
Quiescent current: 0
Emission current≤15mA
Transmitting frequency:315/433MHz±0.5MHz
Transmission distance: no obstacle distance: 80m
Working conditions:
Operating temperature:-10~+55℃ Humidity ≤90%
Application field:
Computer room and base station which are nobody on duty and need remote control.
1.Three phase four line power off alarm
Theft usually cut wires to steal transformers, but when three phase cut or power off, monitoring host will immmediately detect and send wireless SMS message or voice message to receiving host,
receiving host will transmit alarm singal to microcomputer, then microcomputer will alarm after analysing and judging the host and find fault line through alarm software.
2.Three infrared warning
This method mainly use dual infrared and microwave to detect ane early warn.when someone is trying to close to the transformer, infrared shooting will detect the intruder,
then alarm host trigger transformer burglar alarm siren to drive away intruders through high pitched voice.
3.SMS alarm
This method is to preset a center number and multi user numbers. When the transformer's security is threatened, the alarm will send message to mobile phones to alarm,
duty officers receive the report immediately sent police to check situation and deal with relevant problems.
4.Network alarm
The computers of receiving alarm center auto receive alarm, users can clearly see the status of transformers through electronic map.
5.Vibration and pedal alarm
When someone tries climbing the telegraph pole of transformers, after installing a pedal sensor, it will alarm when someone is climbing. When being beaten or moved,
it will alarm through viberation sensor.
Cases:
Structure of power transformer burglar alarm:
transformer anti-theft alarm host, GSM receiving host, alarm center software(center software and electronic map) ,siren.
Optional accessories:
PIR sensor, vibration sensor, displacement sensor,solar panel and anchor ear.
Alarm receiving center
Working principle topological graph
Warm reminder:
BL3000 has 8 wired guarding zones. It has power off GSM message and calling function,arm mode function,
time arm and disarm function.You can add PIR sensor, vibration sensor, displacement sensor accoring to your needs.
Application of power transformer burglar alarm
January 2016, our engineering staff braved cold in Cangzhou( Hebei Electric Power) installed more than 500 sets power transformer burglar alarms.Our products can still work in -30 degrees , no equipment failure.
If you have any questions, pls feel free to contact me.
Shirley Hu
SKYPE: hkbailingintl03
whatsapp: +86 15815547165
Wechat:+86 15815547165