5 micron pp melt blown element water filter cartridge
Features and Benefits
Typical Applications
Specifications
Materials of Construction |
Filter Media: | Melt blown polypropylene |
Inner core: | Polypropylene/Coreless |
|
Micron Ratings: | 1,5,10,20,50,70,100 | |
Filtration effeciency: | 80% | |
O-rings/Gaskets: | Silicone,Nitrile,Viton, EPDM, etc. | |
Dimensions |
OD: | 63mm (2.5"), 114mm(4.5") |
ID: | 28mm (1.1") | |
Length(base on DOE): | 10"-254mm, 20"-508mm, 30"-752mm, 40"-1016mm | |
Filtration Area(M2) | 0.40m2 per 10" | |
Operation Conditions |
Normal Operation Tempreture: | 50℃ (1225℉) |
Max Operation Temperature: | 80℃ (176℉) @ ΔP ≤ 1.0Bar (14PSI) | |
Max Differential Pressure: |
|
|
Normal Direction Flow: |
4.0Bar (60PSI) @ 25℃ (77℉) |
|
Reverse Direction Flow: |
2.0Bar (29PSI) @ 25℃ (77℉) |
|
Ph Value Compatiblity: | 1-13 | |
Sterilization: | not recommended |
Table 1: typical water flow rate @ 25 ℃ (77℉)
Ordering information
Products | Micron | OD |
Adaptor | Length | Core material |
O-ring/Gaskets |
CP |
100-1.0μm | D63- 63mm |
AA-cut ends |
10-10" | P- PP |
S-silicone,N-nitrile, E-EPDM,T-felon,V-viton |
500-5.0μm | D114- 114mm |
CN-226/fin | 20-20" | S- stainless steel |
||
1000-10.00μm | BN-222/fin | 30-30" | How to order? Examples | |||
2000-20.00μm | 40-40" | 1.0 μm, length:10", 63mm outside diameter, adaptor: cut ends, PP core, gasket:silicone | ||||
Selection code: CP100AA10D63PS |