OEM 12v lifepo4 lithium battery rechargeable 12v 10ah lifepo4 battery pack
Product details:
No. | Item | General Parameter | Remark | |
1 |
Rated Capacity |
Typical |
10Ah |
Standard discharge(0.2C) after standard charge |
Minimum |
9.5Ah | |||
2 |
Nominal Voltage |
12.8V |
Mean Operation Voltage | |
3 | Voltage at end of Dischargr |
8V |
Discharge Cut-off Voltage | |
4 | Charging at end of Voltage |
14.6V |
| |
5 |
Standard charge | Constant Current 0.2C Constant Voltage14.6V 0.02C cut-off |
Charge time:Approx 4.0h | |
6 |
Standard discharge |
Constant Current 0.2C end Voltage 8V |
| |
7 |
Fast charge | Constant Current 1C Constant Voltage 14.6V 0.02C cut-off |
Charge time:Approx 2.5h | |
8 |
Fast discharge |
Constant Current 1C end Voltage 8V |
| |
9 | Maximum Continuous Charge Current |
5A |
| |
10 | Maximum Continuous Discharge Current |
10A |
|
Advantage:
1.Long life, large capacity and good shock resistance
2.Low self-discharge and good discharge performance at low temperature
3.Strong charging acceptance and quick-charging capability
4.Strong over-discharge resistance and charge retention
5.Maintenance-free and no acid or water for maintenance in usage
6.Excellent large current discharge performance, and have obvious advantages in startup and climbing
7. High temperature performance
8. Environmental friendly
9. Lighter weight smaller size
BMS:
Our BMS consists of Master BMS Circuitry, Slave BMS Circuitry (we integrate it into our battery module) and contactor.
Besides the basic functions such as over charge/ discharge, over current, short circuit, over temperature and balancing, Our BMS owns the following features,
1. Master-Slave architecture makes the system flexible;
2. Two level warning makes maintenance easier;
3. CAN2.0 and industrial level electronic components make system reliable;
4. Contactor makes high rate charge & discharge feasible;
5. Periodic insulation measurement makes personnel safety possible;
6. Host can control the system easily;
Products:
About us: