4R3216 raymond grinding mill

1. Introduction of the 4R3216 raymond grinding mill

Hongke Hongke Heavy Machinery Co., ltd has 20 years of experience in R & D of 4R3216 raymond grinding mill.

In recent years, the company of 4R3216 raymond grinding mill is constantly updated.

With continuous optimization in performance and quality, the equipment can also be called Raymond machine,

the size of product can be adjusted in the range of 100-325 mesh.

2. Structure of 4R3216 raymond grinding mill

3. Features of 4R3216 raymond grinding mill

1) Vertical structure, small floor area, strong system and with independent production system.

2) The electric system adopts centralized control, and the grinding workshop can basically realize unmanned operation and maintenance.

4. Working Principle of 4R3216 raymond grinding mill

When the main motor power is reduced by gear reducer and the drive center axis and the plum flower frame fixed on the center shaft rotate,

the grinding roll rotates around the center axis under the action of centrifugal force, and it also swings parallel around the pole shaft.

The grinding roller is made to press the grinding ring out in parallel, so that the roller and the ring are in contact with each other.

At the same time, the grinding roller revolves around the grinding roller shaft, so that the material from the shovel can be crushed and ground in the process.

The pulverized powder is sifted by the air flow of the blower to the analysis machine above the mainframe,

and the coarse granularity still falls into the main engine cavity to be reground.

When the particle size is up to the required flow into the cyclone collector, the finished product is discharged through the powder outlet tube after collection.

5. Techinical parameters of 4R3216 raymond grinding mill

6. Accessories of 4R3216 raymond grinding mill

7. Factory pictures of 4R3216 raymond grinding mill