1. Specification
Max Dispense Volume (ul) |
45000 |
Routing (mm) |
60.0 |
Motor angle per step (º) |
1.8 |
Motor drive current (A) |
2.0 |
Pitch of screw (mm) |
5 |
Linear remove per step (mm) |
0.025 |
Resolution (ul/step) |
18.7478 |
Dispense precision |
1.5% |
Coefficient of variation (CV) |
0.5 |
No. of screw port |
6 |
Working pressure (MPa) |
0.2 |
Medium |
Water, oil, weak acid and base, etc. |
Connection port |
1/4-28 UNF |
Dimension (mm×mm×mm) |
270.5×64×60.5 |
Remark: 1. The nominal dispense precision is tested under the dispense volume more than 10% range. 2. The nominal CV is tested under the dispense volume more than 10% range. 3. Mounting way and connection port can be customized. 4. Working pressure can customize to big size. |
2. Stepper motor
STEP ANGLE |
1.8°±5% |
NO. OF PHASES |
2 |
RATED VOLTAGE |
3.4 |
RATED CURRENT |
2.0 |
RESISTANCE |
1.7 ohm±10% AT 25℃ |
INDUCTANCE |
3.6 mH±20% |
HOLDING TORQUE |
0.57 N-m(81 0z –in) (SEE NOTE 1) |
RUNNING TORQUE (AT –PPS) |
--MAX (24VDC.RATED CURRENT.FULL STEP) |
DIELECTRIC STRENGTH |
500V AC 1 MINUTIE |
INSULATION RESISTANCE |
100 MΩ MIN |
INSULATION CLASS |
8 |
TEMPERATURE RISE |
80K MAX (SEE NOTE 2) |
ROTOR INERTIA |
82 g-cm2 (0.45 0z –in2) |
WEIGHT |
APPROX. 380 g(13.4 oz) |
ALLOWABLE THRUST LOAD |
15 N |
ALLOWABLE RADIAL LOAD |
75 N (ON THE SHAFT END) |
AMBIENT TEMPERATURE |
-20℃ TO +50℃ |
AMBIENT HUMIDITY |
15% TO 95% |
LIFE |
5000 HOURS (SEE NOTE) |