Large model 80w diode laser, easy to cut 7mm plywood,If you already have a laser engraving machine, 40w laser will be the best choice for upgrading. Please consult before buying, we will choose the best fit for you!!
How To Installation
Use lifting acrylic board and 33mm heat dissipation aluminum block to adjust, get rid of height restrictions
Your satisfaction is our relentless pursuit,start your DIY engraving adventure!
Our Factory
FAQ
Q:Where is the TTL port? I can only see the PWM? A:TTL and PWM is compatible you can only choose one of them. It means that you can connect this module's PWM port to the PWM (or TTL) port on the control board of your engraver. But make sure the voltage supply of that port is DC 5V. Q:How can I connect this module to the my engraver? A:If you don't need the PWM function, you can directly connect the power port to Motor Port (12V, GND) on your control board and leave the PWM port unconnected. User must read: --Laser module power is relatively large, only for industrial use, to prohibit the exposure of the eye, otherwise it will cause permanent blindness, the consequences at your own risk. --Do not use in flammable and gas atmospheres to avoid fire and explosion. --Prohibit children from exposure to this laser product. --Do not open the module to avoid damage.
No desirable products?
Sourcing assistant>
How to start your business
Step 1
Find your interested products by search keywords
Step 2
Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
Step 3
After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
Step 4
Set up meeting with the Chinese supplier without language barrier