433 MHz wireless Remote sensor lora temperature and humidity controller transmitter
433 MHz wireless sensor lora temperature and humidity controller transmitter
With G7 temperature humidity wireless sensor and Base Station Extender, you can start monitoring your premises environmental condition online.
Wireless sensor G7 transmits measurement to Base Station via wireless signal. Base Station receives wireless data from sensors . Extender receives wireless data from base stations and uploads to central server in interval via Modbus TCP protocol.
G7-Centre App receives data from Extender over Internet or LAN.
G7 Client App for Windows10, iOS, Android displays and stores all the incoming data in computer/tablet/smartphone for data analysis. By monitoring and understanding how environmental changes, you can adjust your air conditioner or heater to save energy and money.
[Detail]
X7 Base Station Extender:
X7 extends the wireless distance up to 5km
creating the IoT platform of sensor data exchange
96 wireless sensors each station
5000 meter extended LoRA wireless distance
[Technical Specification]
|
G7 |
Temperature humidity Sensor |
|
Temperature: |
-40 ~ 125 °C (+/- 0.3°C ) |
|
Humidity |
0 ~ 100%RH (+/- 2%) |
|
Upload Interval |
5s ~ 4 hours |
|
Wireless Distance |
1200 meter (unblock) |
|
Sensor ID: |
User programmable 5 digits |
|
RF Wireless |
433MHz (license free) |
|
RF Power |
< 20dBm |
|
Operation Rating |
80mA (data transmission) |
|
Standby Rating: |
~3.0uA (sleep mode) |
|
Operating Voltage |
2.5~3.6V DC |
|
Battery 3400mAh |
~ 3 year (1hr upload) |
|
Dimension |
80 x 80 x 28 mm |
|
Extended Battery 14000mAh |
~ 10 year (1hr upload) |
|
Dimension: |
115 x 90 x 55 mm |
|
Operating Temperature |
-20 ~ 75 °C |
|
Base Station Extender |
|
|
Station Mode |
1200m wireless to sensors |
|
Extender Mode |
4000m wireless to station |
|
Upload Interval |
5s ~ 4 hours |
|
Protocol: |
TCP/IP Network |
|
|
TCP Modbus support |
|
Network Port |
10/100M Ethernet |
|
|
Fixed & Dynamic IP |
|
Upload Central Server |
Fixed IP & DDNS |
|
Industrial Support |
Modbus TCP protocol |
|
RF Wireless |
433MHz, 4.8Kbit/s |
|
RF Address/Band |
255/15 |
|
Operating Voltage |
9V DC |
|
Rating |
< 1A |
|
Operating Temperature |
-15 ~ 75 °C |
|
Dimension |
110 x 95 x 45 mm |
|
|
|
How to receive the wireless sensor data?
G7 Wireless Sensor sends real time data wirelessly through radio wave to the Base Station.
Base Station collects the measurement of its wireless sensors, and uploads to Extender with max.
1200m wireless distance.
Extender collects all sensors data from base stations wireless, and uploads in one packet to central
server via Ethernet port.
Each Extender supports max. 4 base stations or 96 wireless sensors.
X7 can be user programmed as [Base Station] or [Extender] by user using free bundled X7 Setup
Software.
[Free Software]
G7 Client Lite for Windows 10 (Desktop & Touchscreen), iPad, iPhone & Android Phone
Receives data from Base Station over LAN or Internet
Displays both live, historical and statistical data in graphics
Data records are saved into local storage for comparison or report generation
Data can be exported as csv or SQLite for third party software data analysis
Dashboard display mode gives an overview of 64 sensors reading on one single screen
[INTEGRATION]
Support third party system integration:
1) TCP Modbus
² via industrial standard Modbus data registers
² TCP Modbus tool is bundled free
² Data can be accessed by other SCADA directly
2) API driver
² API dll for third party development
3) REST API
² Web Service API for third party web portal
4) Centre Software
² Data received and saved into text file
5) G7 Server (optional)
² Data received and saved into database
[Application]
Agriculture & Farming: Recording and analysis of temperature humidity situation in greenhouse or farm, where cabling is difficult or impossible. Long distance 5km is ideal in agriculture
Tank & Cold Storage: Diesel Level & Temperature Monitoring are, critical in gas tanks and cold food storage. Alert user wirelessly when oil level or temperature is high/low.
Pharmacy Automation: Keep recording of temperature and humidity for audit and analysis. Hassle free installation without cabling. Instant alarm on temperature
Software
(1) Setup Software
Free and User-Friendly Setup Software for Windows provides a user-friendly graphics interface of configuring the Smart Data Logger.
It allows user to save, export and import the configuration file.
(2) Centre Software
Free Centre Software is a small tool to receive data via GPRS, Ethernet or Wi-Fi for testing purpose.
(3) NET Client App for Windows, iPad, Android
Free NET Client accesses the live data or logged data from Smart Data Logger directly. It then displays the sensor readings in graphics modes on PC, iPad or Android tablet.
It allows user to monitor the real time sensor reading in graphics chart or HMI.
(4) Ultimate Server Client Software Package [Optional]
Ultimate Server is designed to manage a large number of Smart Data Loggers. It handles the data receiving via GPRS, Ethernet, Wi-Fi and SMS in both UDP and TCP protocol simultaneously. It manages the database of incoming data, data loggers and remote client users.
Ultimate Client allows user to monitor both real time data and historical data in graphics chart or HMI.
Easemind Technology Ltd. is established by a team of engineers and programmers specialized in industrial and telecommunication fields.
We have been in business of hardware and software development of wireless data logging devices and industrial telemetry equipment since 1989.
The business and marketing concept of the company consists of:
• Development according to the actual market needs and customer demands,
• Utilization of reliable, trust-worthy and right-to-the-edge technology,
• Turn-around product delivery and service fulfillment within time limits,
• Cost-effective solutions: the right price for the right product, and
• One Stop Solution of hardware, software and user applications
EASEMIND is now a group of companies specialized in RF wireless sensor & mobile data tracking devices for consumer and industrial sectors. Our sales offices are located in US, Hong Kong and China with manufacturing facilities in Zhejiang and Shenzhen, China.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier