400kg/h output 10% water content Cost-effective Airflow wood sawdust hot air dryer
Description:
Water content from 40-50% to 10% output: dry for one time.
Burn the woodfuel as heating source.
1. Hot airflow dryer using high speed flow steam to make wet materials suspend in it, in the process of the air flow (the time is instant, nearly 10~15s), the wet materials will be dried. Then the dried material will be outputted from the cyclone, used hot airflow and steam will be exhausted from the top of cyclone.
2. High heat transfer coefficient
Due to the high speed of hot airflow, the materials dispersing fully in the chambers, so nearly all of the materials surface can be dried. It means the larger heat transfer surface.
Instant drying time airflow speed is very fast, drive the materials to output in an instant, only 10~15 seconds. So it won’t influence the quality of thermosensitive materials or low-melting-point materials.
3. Easy operation of instruction, Less area occupied, Low investment and maintenance cost.
Specifications:
Model | Capacity(kg/h) | Power | Package size(m) | Wood Waste Consumption |
Weight (kg) |
HJ-4 | 300-400 | 4kw | 1.5X1.22X0.98+2.3x1.4x1.5 | 10-15kg/h | 1500 |
HJ-6 | 400-500 | 5.5kw | 1.45x1.2x1.0+2.5x1.9x1.5 | 25-30 kg/h | 1800 |
HJ-10 | 600-800 | 11kw | 2.24*1.63*1.61+1.55*1.2*1.5 | 35-40 kg/h | 3000 |
Applications:
Rice hull, wood sawdust, the small wood shavings, and grain material like crushed branch and wood chips.
Diameter size: <3mm
Length size: <5mm
Input Moisture content: <30%
Output Moisture content: 8%~12%
Main structure of sawdsut dryer
1.Electric cabinet
2.Induced Fan
3.Heating stove
4.Drying pipe
5.Air seal machinery
6.Cyclone
Working Principle
When you feed powder, granule, and sawdust material into the airflow dryer, they are suspended under the function of air blower. In the drying chamber, they are fully mixed with the hot air and get dried quickly. The dried materials has the water content as low as 10%.
Other description of sawdust dryer
1. Pre-sale service: according to your special needs, design and manufacture products for you, provide you with project design, process design, purchase s.
2. On sale: accompany you to check the performance of the machine.
3. After-sale service: we will send engineers to install the equipments to put them into use as soon as possible, commissioning and training operators on site.
Q1:Are you manufacturer or trading company?