400W DC12V or 24V 5 blades built-in rectifier module wind turbine generator with 600W waterproof wind controller
Item | Model | Power | Voltage | Blade NO. | Link |
HA200W-1.2FB | 200W | 12/24V | 3PCS | Click here | |
5PCS | Click here | ||||
HA300W-1.2FB | 300W | 12/24V | 3PCS | Click here | |
5PCS | Click here | ||||
HA400W-1.2FB | 400W | 12/24V | 3PCS | Click here | |
5PCS | Click here |
Wind turbine generator can transfer nature power resource to electrity. Generally, the traditional wind turbine generators produce three phase AC power which is not stable, but this new model wind turbine generator is built-in controller which can let the wind generator produce stable DC power. Considering the generator can start easily, our engineers develop the lower start-up wind speed. Start the wind turbine generator only needs 2m/s wind speed. In order let customer can assemble the wind turbine conviniently, we matched the tools in the package. Customers can assemble the wind turbine independently by the matched tools and no need to prepare other tools. 15-year long life-span wind power generator is deserved you to own it.
1. 2m/s low wind speed starts the wind turbine generator.
This is the most obvious advange of this wind generator in all of same level product on the market which make high wind energy utilization rate.
2. DC output, built-in controller
Built-in controller design make controller produce stable power generation. 12V or 24V DC voltage output can be automatically recognition.
3. Low fault and strong ability to resist the Typhoon
Fan adopts the unique design of the fuselage shock smooth operation, no noise, the blades with nylon composite materials manufacturing and become, with the optimization of aerodynamic design and structural design, start wind speed is low, high wind energy utilization coefficient, increase the power generating capacity. Stern rudder adopts the design of automatic yaw, stronger ability to resist the typhoon, safe and reliable operation.
4. Horizontal shaft function.
The wind turbine generator can adjust the angle automatically according to the wind directions by the horizontal shaft design.
5. 15-year long service life.
Due to the motor internal labyrinth design, external all fasteners are high strength stainless steel products, so it has better protection effect, can waterproof (IP65), prevent sand more effectively.
6. Structure is simple and reliable, beautiful appearance, strong mobility.
7. easy installation
8. Simple Structure
Model No. | HA200W-1.2FB | HA300W-1.2FB | HA400W-1.2FB |
Rated Power | 200W | 300W | 400W |
Max. Power | 250W | 350W | 420W |
Rated Voltage | 12/24 AC | ||
Braked Voltage | 14.4/28.8 AC | ||
Rotor diameter | 1200mm | ||
Rated Rotate Speed | 900r/min | ||
Start-up wind speed | 2m/s | ||
Cut-in wind speed | 2.6m/s | ||
Rated wind speed | 12m/s | ||
Cut-out wind speed | 40m/s | ||
Yaw | fixed-wing type | ||
Engine Type | Three-phase permanent magnet generator (Containing rare earth materials) | ||
Engine Structure | Horizontal shaft | ||
Equipment surface protection | Aluminum oxide+plastic coating | ||
Body Material | Die casting aluminum,one die casting forming | ||
Blade Number | 3PCS(Optonal 5PCS) | ||
Blade material | High strength Carbon fiber with nylon | ||
Pole diameter | 48mm | ||
Life span | 15years | ||
Equipment surface protection | Aluminum oxide+plastic coating | ||
Working temperature | - 40°C to + 80°C | ||
Package Weight | 8Kgs | 8Kgs | 8Kgs |
Package dimension | 700X380X250mm | 700X380X250mm | 700X380X250mm |
Suggestion Battery | 12V80AH*2 | 12V100AH*2 | 12V100AH*2 |
Suggestion Inverter | Off grid DC-AC Pure sine 200W | ||
200W | 300W | 400W | |
Sugggestion Pole Tower | 1. steel tube (2m*3 OR 3m*2); | ||
2. steel wirerope 13m*2(48*4.5 mm) | |||
3. Base |
Functions:
1. this controller can control wind turbines to charge the battery automatically .When the battery is fully charged, brake can be controlled automatically by the interior circuit. When the battery voltage drops to restore voltage level, wind turbine can automatically recover to the battery charging, so as to protect the wind turbine and the battery.
2. Voltage and current limiting are be enabled during recharging to ensure the best charging effect. Meanwhile, it provides the maximum protection to the wind turbine and battery.
3. Unique reverse connect protection circuit. For improper operation the positive and negative of battery, don't need to replace the fuse, only to reset the positive and negative in correct point. So the whole system will be more reliable.
4. LED indicate circuit working condition, concise, intuitive, and clear
5. With the independent intellectual property rights of modular design, which makes the performance of the whole system to get the biggest safeguard. Rectification of this controller and braking circuit part, have adopted the company design integration module, no matter from heat, or reliability, further than the traditional design.
6. The comprehensive waterproof protection. If the controller without waterproof but used in easy ooze water environment or the humidity is heavy, then the controller is easy to be corroded and damaged. Our product adopts full seal completely waterproof design which adapt to the heavy humidity, salinity, such as ground water operational environment. The protection grade reaches the IP67 above, even in water can steadily work normally for a long time.
7. Approved ISO9001 quality management system, our factory strictly controls the production and testing quality which guarantees the high quality in maximum. Workable temperature is from - 35 ~ 70degree.
Parameters:
Model | WT600W12V | WT600W24V | ||||
Wind Power | 600W | 600W | ||||
Battery rated voltage | 12VDC | 24VDC | ||||
Wind discharge voltage | 14.5VDC | 29VDC | ||||
Wind discharge recover voltage | 13.5VDC | 27VDC | ||||
Braking start voltage | 15V | 30V | ||||
Braking recover voltage | 13.5VDC | 27V | ||||
Braking start current | 30A | 30A | ||||
Battery over discharge recover voltage | 12VDC | 24VDC | ||||
Display | LED | |||||
Control model | PWM(Pulse width modulation) | |||||
Operation humiture | -35~+75oC | |||||
Control size | 100×87×28 | 100×87×28 | ||||
Packing size | 200x150x100 | 200x150x100 | ||||
Packing weight | 2kgs | 2kgs | ||||
Quiescent current | 8 mA | 8 mA | ||||
Waterproof | IP67 | |||||
Main function | Wind charge cruuent detection, solar panel and battery transposition protection, battery overcharge protection,short circuit protection,lighting protection, autobrake function |
Our Service:
We can offer color and pattern customization service if there is bulk purchase (MOQ 50pcs). Welcome to contact us with your required colors or patterns.