Related Products
The filling machine applied to aerosol cans with various specifications and can fill any aerosol can with the height within 330mm, and the diameter of aerosol cans could be adjusted freely.
hand operated single pharmaceutical manual hung tse fillon bov aerosol spray can propellant filling machine
HL-1600B semi-automatic filling machine has fully absorbed the advanced filling machine technology from the Swiss Pamasol Company.
It pours liquid raw materials of aerosol products into tanks according to requirement, with ±1% refilling accuracy. The maximum filling capacity is 750ML, and filling speed is 600-1200 cans per hour. You can choose different products based on different models. The overall dimension of filling liquid machine is 1000*600*1350mm
Maximum Filling Volume (ml):20-750ml
Repeat Filling Accuracy:±1.0%
Working Air Pressure (Mpa):0.45~0.7
Maximum Air Consumption (L/min):60
Production Capacity (can/h):800-1500
Packing dimension:1100*600*1500 90kg (L*W*H).
Sealed diameter and sealed depth are easy to adjust, and sealing quality is reliable. With high sealing speed, reliable sealing quality, as well as simple operation, adjustment and maintenance requirement. The machine is specially used for internal inflating sealing of global and universal 1-inch aerosol valve.
Adjustable Sealing Diameter (mm):26.5~28.5)±0.15
Adjustable Sealing Depth (mm):(0~7)±0.15
Applicable Aerosol Can Height (mm):60~350
Diameter (mm):20~100
Working Pressure (MPa):0.45~0.7
Maximum Air Consumption (L/min):50
Production Capability (can/h):1200~1500
Packing dimension:1100*600*1500 110kg (L*W*H).
gas filling machine has fully absorbed the advanced filling machine technology from the Swiss Pamasol Company.
Semi-automatic Liquefied Petroleum Gas , DME gas fillings are applicable to various gases of aerosol products.
The filling machine equipped with a two-way pressurized booster pump, which can pressurize Liquefied Petroleum Gas , DME up to 1.0-120 Mpa and fluidize the Liquefied Petroleum Gas , DME, so as to accelerate filling speed and accurate measuring.
The maximum filling capacity is 500ML,The filling accuracy is ± 0.5% and filling speed is 600-1200 cans per hour.
The filling machine applied to aerosol cans with various specifications and can fill any aerosol can with the height within 330mm, and the diameter of aerosol cans could be adjusted freely.
Maximum Filling Volume (ml):20-500ml
Repeat Filling Accuracy:±1.0%
Applicable Can Model:Height 60~350mm Diameter 20-100mm
Working Pressure (Mpa):0.45-0.8Mpa
Maximum Air Consumption (L/min):60
Production Capability (can/h):800-1500
Packing dimension::1100*600*1500 120kg (L*W*H).
450*380*850 35kg (L*W*H).
More picture show
Equipment instruction
800A semi-automatic crimping&gas filling machine
l This machine is specially for Lab test use in university and other R&D institution.
l It is coming with crimping part and gas filling part, no liquid part, the liquid materials should be manually filled before crimping.
l Crimping head and gas filling head are separately designed at one working table, which ensure your different sizes cans will fit this machine.
l It is sealing with high quality for adopting oriented-sealing; The way of the oriented inflation in the charging end is accurate and efficient with minimal gas consumption. With the original technical design, it is easy to operate saving time and effort.
l The whole system is pneumatic, very safe and reliable. It has small-occupied area, just 0.5m³ and simple operation, belongs to an economical aerosol production equipment.
l Becaues of its small volume, no matter by sea transportation or air transportation, the freight is accetable.
l The propellants can be freon, Liquefied Petroleum Gas , DME, CO2, N2, oxygen, compressed air and so on, This will depands on your aerosol product.
l The machine will be debugged and installed well according to your can’s size. And will be packed into strong wooden case then shipped as a whole machine.
l After you get the machine, you just need to connect it to air compressor, very easy to use and operate.
l All the spare parts we will send you 3 units which enough for using at least 3 years.
Technical Parameter
Production capacity: |
Max 1000-3000cans/shift(8 hours) |
Max Gas volume(ml): |
20ml, 50ml, 100ml, 200ml, 400ml, 500ml(can be choose) |
Gas filling accuracy |
≤±1% |
Working Pressure: |
0.6-1.0Mpa |
Air consumption: |
0.5(m3/min) |
Applicable aerosol can diameter |
20-100mm |
Applicable aerosol can height |
60-330mm |
Machine dimension |
1100*590*1560mm 150kgs |
Available valve: |
1”(25.4mm) |
PACKAGE:
Standard export carton packing, fit for multiple handing and long distance marine shipping.
3-20 days after confirming order,detail delivery date should be decided according to production season and order quantity.