4 Pin Connectors Apa102 30 Led Addressable Indivually Led Pixel Strip Lighting and Circuitry Design Remote CONTROL WIFI Ce
4 pin connectors apa102 30 led addressable indivually led pixel strip
1. Addressable full color led strips ——APA102C IC built-in.
2. Individually control —— 1 IC & I LED chip.
3. Standard Reel Length: 5meter/roll, also can be customized.
4. Cutted: 1 integrated RGB LEDs per segment, can be cutted per 1LED.
you can cut this stuff pretty easily with wire cutters, there are cut-lines
every 0.65''/3.33cm(1 LED each), Solder to the 0.1'' copper pads and you're good to go.
5. Power supply: You must use a 5V DC power supply to power this strip, do not use higher than 6V
or you can destroy the entire strip.
6. Sticky: non-waterproof: with 3M adhesive on back side for sticky;
waterproof: screw+silicon clip, or 3M adhesive back side.
7. Connectors: 4PIN JST female and male connectors, DAT, CLK, DC5V+, GND-.
these LEDs have 2 wires (input and output) for sending data - one clock pin and one data pin.That means you
need two pins, not one, to control DotStars. Because the clock and data is seperated, you can use any processor
speed or type to control these strips, and you don't have to worry about being careful with the timing.
8. Type:
This is the 60 LED-per-meter version, We have 30 LED/m, 60 LED/m and 144 LED/m.
Waterproof——white PCB; Waterproof——black PCB
Non-waterproof ——white PCB; Non-waterproof——black PCB
9. LED Brightness: Red ~600mcd, Green ~500mcd, Blue ~150mcd
10. Brand: iPxel LED
| LED Chip | SMD5050 RGB LED chip |
| IC Chip | APA102C IC built-in |
| LED Quantity | 30LEDs/m |
| Input Voltage | DC5V |
| Watts | 7.2W/M |
| IP Rate | IP20(non-waterproof), IP65(Silicon-tube waterproof) |
| PCB Color | White PCB, Black PCB |
| View Angle | 120° |
| Standard Reel Length | 5meter/roll, also can be customized |
| PCB Width | 10mm |
| Operating Temperature | -20 ~ +40°C |
| Storage Temperature | -40 ~ +80°C |
| Color | Addressable full color |
The compared of APA102 30leds/m, 60leds/m, 144leds/m:
| TYPE | 30LEDs/m | 60LEDs/m | 144LEDs/m |
| IC | APA102C | APA102C | APA102C |
| PCB Width | 10mm | 12mm | 12mm |
| Standard Length | 5meter/roll | 5meter/roll | 1meter/roll |
| PCB color | white/black | white/back | white/black |
| Voltage | DC5V | DC5V | DC5V |
| Watts | 7.2W/M | 14.4W/M | 34.56W/M |
| Cutted | per 1 LED | per 1 LED | per 1 LED |
The excellent light and user-friendly designs make LED strip perfect for numerous applications, i.e cove lights,
back lights, cabinet lights, edge light, architectu ral lights for corridor, canopy, archway, lights for path and contour
marking; etc.
They can be a good choice for lights for hotels, restaurants, night clubs, coffee / wine bars, shopping malls,various
shops, cinemas, beauty centers, office fronts, ev en lights for household kitchens or living rooms, etc.
SPI signal: LED Strip+LED power supply +LED controller
DMX control: LED Strip+LED pwer supply+DMX Controller+DMX decoder
LED controller: T- series SD card controller, RF remote controller, DMX controller, Arduino...
(offline / PC online)
LED power suppply: Meanwell power supply, T- series, A- series power supply...
(waterproof / non-waterproof)
1. Payment Terms:
T/T, Western Union, Ali Excrow(Credit Card, Debit Card, Bank Transfer)
2. Lead Time:
Usually we had materials in stock, regular order delivery time 1--7days after the order(PI) paid,
Customized products 8--15days(Custom PCB).
3.Warranty:
2 years warranty since the data of purchase our LED products.
4. Delivery Ways:
DHL, Fedex, TNT UPS, EMS door to door service, by sea, by air, etc.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier