Features:
1.Tape demonstrated no evidence of wear through after Taber Abrasion at 1000 cycles, using CS-10 wheel and 1000g load when applied to S-37 mounting sheet.
2. Low water vapor transmission rate <0.50 g/100in. 2 /24hrs.
3. Thick caliper UHMW polyethylene tape for extended service life as a protective surface against tough impact wear or sliding applications.
4.Outstanding abrasion resistance so will outwear PTFE and other materials in sliding applications.
5. Low coefficient of friction characteristics is exceeded only by PTFE.
6.UHMW-PE tape can be used where lubrication is not possible because ofcontamination.
7. Rubber Adhesive provides good initial tack for immediate bonding to material surface.
8.Liner makes it ideal for fabricating or die-cutting into various lengths and shapes.
1 | Noise reduction between dissimilar parts. |
2 | Reduce squeaks, rattles and other noises that occur with movement |
3 | Lining of conveyer guide rails, tank and bin liners, and discharge chutes. |
4 | Protection for aluminum sheets on stretch forming presses. |
5 | Liners for Spray booths. |
6 | Slick surface for easy glide for drawers and cabinets |
Transport
Most of our products can delivery within 3 days, refer to some special shapes and size, within 7 days.
Special products need to communicate with us for details.
For details, please contact:
Alisa (+86 18576705967 ) - Tel & whatsapp
Email: Alisa@ szhytape.com