3cct 5cct triac 0-10v dimmable Fast and easy to install juction box driver 6 inch 12W CE ETL T24 led panel light

Fast and easy to install metal juction box driver 6 inch 12W  led panel light with ETL(5004879) cETL approvals

Features:

1. Heat Sink: It could be installed in the ceiling without housing cans. Easy to install within several steps.

2. Sturdy Springs: Our recessed light is easy to install and attach in the ceiling with the well constructed snap springs.

3. Junction Box: This recessed light with slim junction box could be installed in the ceiling without housing cans. Easy to install within several steps.

4. Ultra Slim Light Body: Only require 2 inches in height to install the super thin recessed light, no extra housing cans needed, save more space in ceiling.

Installation steps:

1.Cut out the hole in the ceiling( use the measurement of circle on the box) 

2.Open the box and take out the accessories of the wire clip

3.Prize up the plug put the wires through the hole

4.Insert the ends of the wires separately(N-N, E-E , L-L ,) into the clips and turning. 

5.Lock the box. 

6.Holding the clips and put the fixture into the whole. 

7.Release the springs and push the fixtures in to the hole. 

8.Push the fixture into installation hole while holding the clips, as we show in the pictures.

• IC Rated - This canless LED recessed light is IC rated, which is permitted to be in contact with insulations in ceilings, meaning the junction box is thermally protected. It only requires as small as 2 inches ceiling spaces, fits various ceilings, and joists. Recessed can is no longer a limitation for your choice.
• Space-Saving Solution - The recessed lighting ultra-slim design goes where can lights can’t. 3/5 in. depth makes this product great for use in shallow ceilings.
• Easy Install - No Housing or J-box Needed.The low profile recessed lighting is suitable for retrofit and new decoration: Cut a hole in ceiling with 1:1 hole template; Connect the Jbox to the cable; Use spring clip to fix it on the ceiling. Hassle-free, the installation can be completed in minutes.
• High Brightness - The 6-inch slim lights use the new generation of LED chips with higher lumens and lower power. 1050LM consumes 12 Watts, which equals to 110W incandescent lamp, saving you up to 88% in energy costs. Frosted LED lens for anti-glare and scratch-resistant.
• Wide Application - Ultra-thin body, 5%-100% smooth dimming, compatible with most dimmers, suitable damp location, meets kinds of needs in applications such as kitchen, living room, bedroom, bathroom, workplace, common areas, outside soffits and other hard to reach spaces.

Detailed Image 

led panel downlight with details:

 

 

 

 

 

Applications

Company Profile:

DANS Opto-ElecteronicTECHNOLOGY CO., LIMITED is engaged in the scientific research, manufacture,

technical support and service of LED semiconductor illumination products. Operating in strict accordance

with the ISO9001 quality management system, DANS is equipped with advanced experimentation equipment

and fully automatic production lines, and has an annual output capacity of 1,000,000 pieces of  LED lights.

We have a strong R&D team comprised of professionals engaged in LED flood lights application, electronics, illumination, construction,

LED special power supply and technical design. We have developed super high brightness

LEDs with low degradation rates and launched many series of 6 inch round led panel light with junction box driver products.

Certifications

6inch 12w led panel downlight with driver in a box have cETLus and energy star:

Quality Control

1). 6 inch led panel downlight with junction box driver efficiency: 80-90lm LED chip.
2). 6 inch led down light with junciton box driver Efficiency >90 in reality.
3). 6 inch led panel downlight with junciton box driver CRI>82Ra,subject color is real and nice.
4). 6 inch led panel downlight with junction box Heat Dissipation,housing temperature about 30-50 degree.
5).6 inch led down light with junction box Beam Angle 120 degree available,up to your application.

6). aluminum alloy quality,Anti-UV,Anti-corrosion dealing etc.;Driver detailed & long time test.

7). 36h aging test to confirm all landscape lamps quality is great.

8). following schedule for quality and lead time.Every order's progress is shown to all relative  perons in software and board Every Day.

9). files for item No.,quantity,color temperature,voltage,label,packing  etc.All with signature of responsible persons. 

10). All 6 inch led down light with junction box driver managed by software

Our service:

1.Your inquiry related to our 4 inch led down light with junction box driver or prices will be replied in 24hours.
2.Well-trained and experienced staffs to answer all your enquires in fluent English

3.OEM&ODM, any your customized lightings we can help you to design and put into product.
4.Distributoership are offered for your unique design and some our current models
5.Protection of your sales area, ideas of design and all your private information

Trade Terms:

1. Payment term: 30% deposit by T/T or Westernunion; 70% balance to be settled before delivery.

2. 6 inch led down light with junction box driver Delivery time: 3-5 days for 500pcs; 7 days for 1000pcs.

3. 6 inch led panel downlight with junction box driver Samples ready time: 3 days.

4. 6 inch led panel downlight with junction box driver Shipping terms: FOB Shenzhen, China.

5. 6 inch led down light with junctiob box driver Discounts will be dertermined by quantity.

6. Welcome agents to cooperate together.

Contact:

Shenzhen DANS Opto-Electronic Technology Co.Ltd.

contact person: Niki

E-mail: sales06(at)dansled.com.cn

Skype: danslighting

Tel: +86 0755-84016919