3bars micro channel 810nm laser diode hair removal laser stack for laser hair removal handpiece repair
This diode laser hair removal handpiece model N is made of 3 pcs diode bar(4 decorate bars and 3 real bars) with micro channel cooler. The diode laser bars in this handpiece is VS-MI-100-8-NL3-5, laser power 300W. micro channel 810nm laser
Laser Stack Photos micro channel 810nm laser
Laser Stack Specification micro channel 810nm laser
Model No. | VS-MI-100-8-NL3-5 |
Application | permanent laser hair removal handle repair diode laser 808 300w nlight laser stack |
Operation Mode | CW |
Power per submounts | 100W |
Number of submounts in one stack | 3bars |
Central wavelength at 25℃ | 808 ± 5nm |
Typical Operation current | 85A |
Maximum Operating current | 100A |
Typical Threshold current | 15A |
Maximum Operating Voltage | <6V |
Fast Axis Divergence (FWHM) | 39º |
Slow Axis Divergence (FWHM) | 8º |
Operation Condition | non-condemsing atmosphere, cleaning room |
Expected lifetime | 10000hours |
Typical pitch per bar | 1.8mm |
Cooling requirement | |
Flow rate | 1L/min +-10% |
Water Temperature | 25+-3°C |
Water Quality | Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm |
cooling system | Do not use any material that combination with copper would form galvanic elements |
Laser stack drawing micro channel 810nm laser
Repairing procedure micro channel 810nm laser
>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.(Please see follow repair process) micro channel 810nm laser
>Choice B: if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.(Please see follow repair process) micro channel 810nm laser
>Choice C: Measure your stack and comfrim the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.
Diode laser handle piece and laser stack repair process
First , after we received the old broken handle from customer, we check the apperance of handle to confirm whether all the parts are completed and in good condition. micro channel 810nm laser
Second, we disassemble the handle piece, and test the old laser stack. For the nlight laser stack, we will test each laser plate one by one to confirm whether there are any one bars still can work. If there have some good bars, the repairing charge will be lower. micro channel 810nm laser
Third, we choose best quality laser stack to replace the old broken one. Our bars are imported from Germany. We mounted bars and assemble them to laser stack in our lab. Every stack will be fully tested and had 8 hours buring test. micro channel 810nm laser
Finally, our experienced technician will reassemble the handle piece. Which include:
a: Install the new laser stack into the handle piece micro channel 810nm laser
b: Clean lens and check the TEC and other parts inside the handle piece
c: Test the power output of whole handle piece micro channel 810nm laser
d: Clean the cover shell of handle piece and package it.
1. Germany Imported laser bar(over 10000hours lifetime)
2. Professional technical team(So far we have repaired 57 pcs laser handle) micro channel 810nm laser
ivylaser majors in diode laser mounting more than 11 years, We are a true factory with a Federal Standards 209E clean room. And the newest Ausn mounting technology will be applied when repairing the laser hair removal handle.
Packing: Aluminum case and carton box micro channel 810nm laser
Delivery time: about 4 working days after received your payment.
If any interested, more products specification as well as price,sample will be sent for your reference. micro channel 810nm laser
Any questions, please contact Vicky for help(Please click the name card to send vicky an inquiry)