Product Description
3M Double Coated Tapes with 3M Laminating Adhesive 300LSE provides
high bond strength to most surfaces, including many low surface energy plastics
such as polypropylene and powder coated paints.
The acrylic adhesive also provides excellent adhesion to surfaces contaminated lightly
with oil typically used with machine parts.
Features
• This tape has a film carrier which can add dimensional stability to foams and other substrate
and also makes it easier to handle the tape during slitting and die-cutting.
• The bond strength of 3M Laminating Adhesive 300LSE increases as a function of time
and temperature, and has very high initial adhesion.
Environmental Performance
Humidity Resistance
High humidity has minimal effect on adhesive performance.
No significant reduction in bond strength is observed after exposure for seven days
at 90°F (32°C) and 90% relative humidity.
UV Resistance
When properly applied, nameplates and decorative trim parts are not adversely affected
by exposure to direct sunlight.
Water Resistance
Immersion in water has no appreciable effect on the bond strength. After 100 hours
at room temperature, the high bond strength is maintained.
Temperature Cycling Resistance
High bond strength is maintained after cycling four times through:
4 hours at 158°F (70°C)
4 hours at -20°F (-29°C)
4 hours at 73°F (22°C)
Chemical Resistance
When properly applied, nameplate and decorative trim parts will hold securely
after exposure to numerous chemicals including oil, mild acids and alkalis.
Logroll Size: 54IN*55M
Customized size and shape is available by our cutting and die cutting skill