3FE72955AA FWLT-B Provide technical support services support XGSPON

The debugging of XGSPON board is very different from that of ordinary GPON board. We can provide technical support services in XGSPON debugging process. If you have any technical problems in testing ONT, we can help you solve them.Welcome to your consultation

MODEL:FWLT-B Part Number:3FE72955AA

The FWLT-B:

• Is a line terminating unit for the Intelligent Services Access Manager (ISAM).

• Can be used in 7360 ISAM FX subracks.

• Supports G.989 NG-PON2 TWDM, respectively G.9807 XGS-PON on any of the eight ports on the board.

• Contains a Traffic Manager function that provides flexible scheduling and rate

limiting on a per ONT, per UNI and per class of service basis for downstream PON traffic.

• Meets ANSI and ETSI/MII requirements.

• Can be used in Central Office (CO) and remote deployments in ISAM FX Equipment

We have a new stock of all parts in the 7360 ISAM FX series.

The FWLT-B is a Next Generation U-NGPON line termination board. This board can be installed in a 7360 ISAM FX subrack.

The FWLT-B meets ANSI and ETSI/MII requirements and can be used in CO and remote deployments.

The FWLT-B provides support of G.989 NG-PON2 TWDM, respectively G.9807 XGS-PON on any of the eight ports.

It supports a throughput of:

• 10 Gbps in downstream direction and

• 10 Gbps or 2.5 Gbps in upstream direction depending on the optics the board is equipped with.

By combining several wavelength profiles on the different TWDM ports of the FWLTB and using the corresponding optics, the aggregate throughput can go up to 40 Gbps (4 wavelength profiles, so 4 x 10 Gbps) in downstream direction and 40 Gbps (4 x 10 Gbps) or 10 Gbps (4 x 2.5 Gbps) in upstream on a single TWDM PON fiber.XFP optical modules can be plugged in on the FWLT-B board. For an overview of the supported pluggable optical modules, see the Product Information manual of your system.

The FWLT-B generates downstream signals synchronized to a timing reference from one of the two NT slots. All other clocks and synchronization signals are derived from on-board oscillators.

If you only need hardware, please send me the part model and the BOM number.

If you have network design requirements, please send us the following information:

1. Type of service board, GPON or EPON, number of PON ports ?

2. How many ONUs need to be connected?

3. Types of GPON service Board Optical Modules (CLASS B+, CLASS C+, CLASS C++)?

4. Uplink interface type (if upstream is GE port, is it electric or optical port), speed, etc

If you want to get more product information, please email us and we will provide you with detailed internal documents.