380V 3ph 2.2kw/2200W Mini Variable Frequency Inverter Same as VFD-L

Items

S800E

Power
Supply

Rated voltage, Frequency

One-phase/Three-phase AC 220V 50/60Hz

Voltage Range

220V: 170~240V

Output

Voltage Range

220V: 0~220V

Frequency Range

0.10~400.00Hz

Control method

V/F control, Space vector control.

Indication

Operating status/Alarm definition/interactive guidance: eg , frequency setting, the output frequency/ current, DC bus voltage, the
temperature and so on.

Control SpeciAlations

Output Frequency
Range

0.10Hz~400.00Hz

Frequency Setting
Resolution

Digital input: 0.01Hz, analog input: 0.1% of
maximum output frequency

Output Frequency
Accuracy

0.01Hz

V/F Control

Setting V/F curve to satisfy various load
Requirements.

Torque
Control

Auto increase: auto raise torque by loading
Condition; Manual increase: enable to set
0.0~20.0% of raising torque.

Multifunctional
Input Terminal

Four multi-function input terminals, realizing
functions including fifteen section speed control, Program running, four-section acceleration/deceleration speed switch, UP/DOWN
function and emergency stop and other functions

Multifunctional
Output Terminal

1 multi-function output terminals for displaying
of running, zero speed, counter, external
abnormity, program operation and other
Information and warnings.

Acceleration/ deceleration Time Setting

0~999.9s acceleration/deceleration time can be set individually.

Other functions

PID Control

Built-in PID control

RS485

Standard RS485 communication function(MODBUS)

Frequency Setting

Analog input: 0 to 10 V, 0 to 20mA can be
selected;
Digital input:Input using the setting dial of the
operation panel or RS485 or UP/DOWN.
Note:AVI terminals can be used to select an
analog voltage input(AV) and analog current
input(AI) through the switch J2.
Note: AVI terminals can be used to select an
Analog voltage input (AV) and analog current
Input(AI) through the switch J2.

Multi-speed

Four multifunction input terminals, 15 section
speed can be set

Automatic
voltage ID ControlliAlation regulation

Automatic voltage regulation function can be
Selected

Counter

Built-in 2 group of counters

Protection/Warning Function

Overload

150%, 60 second(Constant torque)

Over Voltage

Over voltage protection can be set.

Under Voltage

Under voltage protection can be set

Other Protections

Overheat,output short circuit,over current, and
Parameter lock and so on.

Environment

Ambient Temperature

-10℃ to 40℃(non-freezing)

Ambient Humidity

Max. 95% (non-condensing)

Altitude

Lower than 1000m

Vibration

Max.0.5G

Structure

Cooling Mode

Forced air cooling

Protective
Structure

IP 20

Installation

Mode

Wall-mounted or standard 35MM rail mounting