360 DVR Camera System For Toyota Land Cruiser
Have 3types for the below cars
360Degree Camera For 2012-2014 Toyota Land Cruiser
360Degree Camera For 2016-2018 Toyota Land Cruiser
360Degree Camera For 2019-2020 Toyota Land Cruiser
Features:
Our Interface box most support VGA Channel Input,work with our 360degree bird view dvr camera system very high clear photo,and easy install,no need connecting left/right turn lights trigger line,reversing trigger line and RCA connectors,etc,only need connecting our interface box VGA input wire to 360degree box VGA wire
Technical Specification
1 on the same screen can be switched four or a single picture (PIP)
2. 1-4 camera support, you can easily switch to each screen
3. Standby mode when triggered automatically boot, and switch to the trigger signal path
4.Support memory function, four images recorded at the same time, the memory contents can forensics
5.Support 32G genuine memory card, the memory continue recording 100 hours
6.SD card memory content can be played on a computer
7.The system, such as battery power in, can achieve full real-time memory, such as not driving a car for a long time, pay
attention to turn off the power, otherwise run out of power storage vent save electricity, it is recommended to use the ACC power
8 standard HD CCD car camera, support 4-24V wide voltage power supply, can work long hours without fever, ordinary camera standard
power supply can not be used for a long time
9 highly seismic;
10.NTSC/PAL system automatic recognition;
11. applies to all of the display terminal equipment compatibility
12. automatic switch, remote control, does not require tedious manual to help you easily bid farewell to the driver's blind spot,
greatly driving Reserve car safety
13. After the system is powered long video, does not appear drain seconds circumstances.
360-degree panoramic images auxiliary turn signal rocker or bring their own camera system remote control about, want to see that
we want to see the body around in different directions.
(1) front camera: the user presses the emergency lights, or use the system comes with the remote control to switch view camera image input Rearview camera
(2):miss into the "R" file, or use comes with the system remote control rear view camera automatically switches the image input
(3) the left side of the camera: Press the left turn signal, or use the system comes with remote control, you can switch the
camera input
(4) the right side of the camera: Press the right turn signal, or use the system comes with remote control, you can switch the camera input
Product Functions
1. System DC12V input, cameras, power control box by the all-seeing, do not need to find another power, ease of installation, and
is widely used in a variety of vehicles.
2. car starts, the system automatically enters the video program. Can also be turned off by default.
3. hit the left / right turn signals, full, as the system automatically displays the corresponding left / right camera and front
and rear camera screen.
4.Any case, reversing automatically to reset display the reversing screen, reverse gear, automatically switches the the front
camera screen, turn off automatically after 15 seconds.
5. with a three-way trigger signal, reverse, turn left, turn right signal line, and mandatory start in response to the
corresponding screen.
6.Full view reversing system, four input to the controller output all the way Car Monitor / DVD.
7. with separate front control buttons, you can choose to display or not display any picture.
8. cameras around, adopt high-definition CCD chip, 170-degree wide-angle field of view.
9.Embedded installation, waterproof earthquake, for indoor and outdoor work.
10.The high quality of the original car comes already installed rear view camera, can be retained according to the actual
situation.
Product Parameters
1.Front,Left /Right Side,Back View Camera
2.A high-resolution CCD chip
3.Resolution of 900 lines
4. Paste to install, easy to use.
5. Waterproof and shockproof design suitable for outdoor use
6.360 degrees wide range of viewing angle
7. night vision function
8. Video Input: 1.0V p-p 75Ω
9.Power supply: DC12V ± 10% 80mA
10.Operating Temperature(Deg.C):-20+75(RH95% Max.)
11.Storage Temperature(Deg.C) :-40+85(RH95% Max.)