CATEGORY | ITEM | UNIT | CY-250ST | Standard♦ Option ◊ | ||||||||
INJECTIONUNIT | Screw Diameter | mm | 26 | 28 | 30 | ◊ | ||||||
Injection Pressure | kg/cm² | 1410 | 1220 | 1060 | ♦ | |||||||
Theoretical injection capacity | cm³ | 61 | 70.8 | 81 | ♦ | |||||||
Injection volume (ps) | g | 56 | 65 | 74 | ♦ | |||||||
Injection volume (ps) | OZ | 2 | 2.3 | 2.6 | ♦ | |||||||
Injection rate | cm³/sec | 55 | 63 | 73 | ♦ | |||||||
Screw stroke | mm | 115 | ♦ | |||||||||
Screw Speed | rpm | 0-205 | ♦ | |||||||||
Nozzle contact force | Tons | 4.45 | ♦ | |||||||||
Nozzle stroke | mm | 170 | ♦ | |||||||||
Temperature control segment | 3 | ♦ | ||||||||||
CLAMPINGUNIT | Clamping Force | Tons | 35 | ♦ | ||||||||
Template size | mm | 540×380 | ♦ | |||||||||
Tiebar distance | mm | 375×205 | ♦ | |||||||||
Min.mold thickness | mm | 58/158 | ◊ | |||||||||
Opening Stroke | mm | 180 | ♦ | |||||||||
Max.mold opening distance | mm | 238/338 | ♦ | |||||||||
Ejetor force | Tons | 1.3 | ♦ | |||||||||
Ejetor Stoke | mm | 35 | ♦ | |||||||||
POWER\HEADING UNIT | Max.Hydaulic Pressure | kg/cm² | 140 | ♦ | ||||||||
Pump output | l/min | 34.5 | ♦ | |||||||||
Acting oil capacity | l | 100 | ♦ | |||||||||
Cooling water consumption | l/hr | 400-600 | ♦ | |||||||||
Motor power | KW/HP | 3.7/5HP | ♦ | |||||||||
Electric heating capacity | KW | 2.4 | ♦ | |||||||||
Total power | KW | 6.3 | ♦ | |||||||||
OTHER | Machine Weight | Tons | 1.05 | ♦ | ||||||||
Machine external size(LxWxH) | cm | 135×100×225 | ♦ | |||||||||
Shipping Weight | Tons | 1.15 | ♦ | |||||||||
Shipping size(LxWxH) | cm | 145×115×235 | ♦ | |||||||||
If the above values are changed, we will not inform you otherwise. If you have any special requirements, please contact us. |
CY-250ST Plasti type | ||||||||||||||
Plasti type | TEMPERATURE SET | Hopper Temp | Screw RPM | Mold Temp | Contract | |||||||||
Nozzle | First | Second | ||||||||||||
ABS | 190-250 | 180-240 | 170-240 | 80-90 | 30-60 | 50-80 | 0.6 | |||||||
AS (Styrene) | 205-240 | 190-235 | 180-230 | 75-85 | 30-60 | 35-50 | 0.4-0.6 | |||||||
PS (Polystyrene) | 180-260 | 200-260 | 160-250 | 75-85 | 35-65 | 10-75 | 0.4 | |||||||
HIPS 475 | 220-270 | 190-260 | 160-250 | 80-90 | 50-80 | 5-75 | 0.4 | |||||||
PP (Polypropylene) | 210-330 | 180-260 | 160-240 | 70-80 | 50-99 | 50-80 | 1.0-2.5 | |||||||
LDPE | 230-310 | 220-300 | 170-220 | 70-80 | 50-60 | 35-60 | 1.5-5.0 | |||||||
HDPE | 230-310 | 220-300 | 170-220 | 70-80 | 50-60 | 35-60 | 2.0-5.0 | |||||||
PMMD | 180-230 | 160-240 | 140-220 | 80-100 | 40-80 | 50-90 | 0.5 | |||||||
PA6 (Nylon 06) | 210-230 | 210-230 | 200-210 | 80 | 45-50 | 50-80 | 0.8-1.5 | |||||||
PA66 (Nylon 66) | 250-280 | 240-280 | 220-280 | 80 | 45-50 | 50-80 | 2.25 | |||||||
POM | 190-210 | 175-220 | 160-210 | 80-90 | 40-80 | 50-90 | 2 | |||||||
PC (Polycarbonate) | 250-320 | 260-340 | 280-350 | 100-120 | 25-55 | 80-100 | 0.8 | |||||||
PVC | 170-220 | 160-195 | 150-190 | 60-80 | 30 | 15-60 | 0.1-0.5 | |||||||
PET (Polyester resin) | 280-295 | 270-275 | 265-270 | 130-140 | 25-45 | 30-85 | 5.0-15 | |||||||
PBT | 250 | 245 | 235 | 130-140 | 40 | 60-70 | 10 | |||||||
CA | 180-220 | 170-190 | 150-180 | 50-70 | 85-90 | 40-75 | 0.5 | |||||||
SAN | 190-250 | 180-230 | 170-220 | 75-90 | 90 | 50-80 | 0.2 | |||||||
DRE+EVA | 185 | 160 | 160 | 50-80 | 99 | 35-45 | 10 | |||||||
TPE(PE) | 170-210 | 160-190 | 150-185 | 60-80 | 30 | 20-60 | 0.1-0.4 |