355nm Huaray 5W UV Laser Marking Machine and Laser Engraving Machine for Glass Plastic Paper Cloth Wood Metal
355nm Huaray 5W UV Laser Marking Machine and Laser Engraving Machine for Glass Plastic Paper Cloth Wood Metal
Laser Solution Can be Customized !
Factory Price Can be Negotiable !
Contact: Ms Kelly Lee
Whatsapp 008613707153907
UV Laser Marking Machine - Introduction
Ultraviolet laser marking machine belongs to a series of laser processing technology. It uses 355nm UV laser as the light source. The machine uses third-order intracavity frequency doubling technology to compare with infrared laser (pulsed fiber laser), 355 ultraviolet focusing spot. Small, can greatly reduce the mechanical deformation of the material and has little influence on the processing heat, because it is mainly used for superfine marking, engraving, cutting.
It is especially suitable for applications such as marking of food and pharmaceutical packaging materials, micropores, high-speed division of glass materials, and complex graphic cutting of wafer wafers.
UV laser marking machine - Main Features
- Laser (light source): 355 nm UV laser
- Air-cooled device, small size, 20,000 hours maintenance-free (theoretical 20,000 hours of service life).
- It requires water cooling, distilled water or pure water.
- The focused spot is extremely small, and the processing heat affected zone is small (cold light), making the material heat-receiving area smaller. Not susceptible to heat deformation, ultra-fine marking, special material marking.
- Low cost of use, better beam quality, high efficiency, low power consumption, more energy saving and environmental protection.
- Can be applied to high-end market, ultra-fine marking environment, cosmetics, pharmaceuticals, LCD liquid crystal, electronic components, communication equipment, food and medicine packaging, glass division, electronic components, metal jewelry marking.
UV Laser Marking Machine - Technical Parameters
|
UV Laser Marking Machine |
|||
|
|
Parameter |
Unit |
Description |
|
Wavelength |
354.7 |
nm |
|
|
Average Output Power |
2.0~~10.0 |
W |
@30kHz |
|
Pulse Width |
<16 |
ns |
@30kHz |
|
Pulse Repetition Rate |
10-100 |
kHz |
|
|
Spatial Mode |
TEMoo |
|
|
|
M2 |
<1.2 |
|
|
|
Beam Diameter |
2.0+/-0.2 |
mm |
1m Measured at window |
|
Beam Full Divergence Angle |
<0.5 |
mrad |
|
|
Beam Circularity |
>0.9 |
|
|
|
Pulse-to-Pulse Stability |
<3 |
% |
RMS |
|
Average Power Stability |
<5 |
% |
RMS/8hr |
|
Beam-Pointing Drift |
<25 |
µrad/℃ |
|
|
Polarization Ratio |
>100:1 |
|
|
|
Polarization Orientation |
Horizontal |
|
|
|
Operating Temp. & RH |
10 to 35 |
℃ |
|
|
Storage Temp. & RH |
-20 to 65 |
℃ |
|
|
Electricity Requirement Power Consumption |
100-240 |
VAC |
Single phase |
|
Warranty |
12 |
months |
|
Table Type Laser Marking Machine with Huaray UV Source
Big Closed Type Laser Marking Machine with Huaray UV Source
Separate Type Laser Marking Machine with JPT UV Source
UV Laser Machine is best choice for marking glassware, glass cups, glass bottles, glass decorations.
UV Laser Machine mark non-woven fabric, leather, plastic, rubber,silicon, wood ,metal etc.
OV Laser - Fiber Laser Marking Metal and Nonmetal Samples.
Fiber Laser Machine suits for marking/engraving almost all metal and cutting thin jewelry on gold silver brass.
OV Laser - CO2 Laser Marking Nonmetal Samples
CO2 Laser Machine suits for marking and engraving most of nonmetal materials,such as wood acrylic leather plastic rubber etc.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier