32inch' Wide lcd polarizer film for 32 inch wide screen,0 degree glossy polarizing film
SIZE: 710X405MM
Angle of view:0 degree
Used:32inch wide
Surface:glossy/matte
Thick:0.22mm
Why replace the polarizer film:
If your lcd led screen surface look old,scratched,cracked,but the function is ok,
Now you only need to replace a new polarizer film.
Polarizer film Use:
Polarize Film for LCD LED Screen,These are hign efficiency,anti-reflection
Polarizer films.The Polarizer film is a film that is applied to the front of your screen and will
give you the following advantages: Increases display contrast and readability.Images are
clearer and sharper; provides deeper looking colors; permits a wider viewing angle in
brighter environments; increases surface transmission; protects panels from fingerprints and scratches.
Note: If you want to replace the polarizer film,you need to know correct angle,
Most of the laptop and desktop panels are used either 135D or 45D while large LCD LED TV screen uses 0D. Polarize Film can be cut at any angle.
If you do not know angle, we can supply angle tester tool, welcome to contact us .
How to replace Polarize Film
Technically, this process MUST be done in a clean room environment with the special equipments. However, for the samller screen ,such as laptop ,
GPS and mobile screen, you should be able to complete this process by simply using a paint roller.
This instruction is based on mobile, Make sure your LCD screen is cleaned
Polarize Film--The polarize film is protect by two clear plastic films.
First identify the bottom side and then peel it off the clear plastic(just peel it off about 1/2 of Polarizer film) start with on one corner (Shown Photo)
Place the polarize film on top of screen and align the position
Now slowly peel off the bottom plastic while you roll over on the top of film (Shown Photo)
Peel off the top plastic film
If there are bubbles, you can use a clean towel and slowly push them out.