WE also can offer non-standard bearing as below
60/22 22x44x12 mm
60/28 28x52x12mm
60/32 32x58x13mm
62/22 22x50x14mm
62/28 28x58x16mm
62/32 32x65x17mm
63/22 22x56x15mm
63/28 28x68x18mm
63/32 32x75x20mm
63/25 25x56x16mm
63/30 30x75x20mm
63/35 35x85x23mm
63/28/22 22x68x18mm
450706 30x75x21mm
450907 32x80x23mm
B19 20x52x12mm
69/22 22x39x9mm
Marine grade 316 stainless steel ball bearings for shafts from 3mm to 50mm diameter
We can supply 316 stainless steel ball bearings with polyethylene, PEEK or PTFE cages. These marine grade bearings are available open or with low friction seals from stock and are highly resistant to seawater, salt spray and many chemicals. 316 stainless steel bearings are suitable for temperatures up to approximately 500°C if full complement or 260°C with a PEEK or PTFE cage. They can also be used for cryogenic applications down to minus 250°C depending on cage material.
As 316 stainless steel cannot be hardened by heat treatment, these stainless steel bearings are only suitable for much lower loads and speeds than the 440 grade bearings and are lower precision than 440 types. For the more commonly used 440 grade stainless steel bearings, please see more details on our product page.
316 stainless steel ball bearings are suitable for use in the food or beverage industry and can be re-lubricated with food grade lubricants. Corrosion resistant bearings can also be supplied insynthetic materials or zirconia or silicon nitride.
A: We are factory.
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
A: Payment<=5000USD, 100% in advance. Payment>=5000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below