30V 20A High Precision 1mV1mA Programmable Switch Mode Laboratory DC Adjustable Power Supply PPS-3020
DC Adjustable Power Supply
Introduction
PPS series are high accuracy programmable DC power supply with single output. MPU control, RS-232/RS-485/USB interface for PC control, the PPS series facilitates auto test and auto control. The commands of the PPS series are compliant with SCPI commands. Users can easily develop programs to facilitate different applications in auto test and auto control. Users can also store or recall data via the USB host on front panel.
The 4.3-inch TFT LCD display gives full display for parameters and output waveforms. Digital input fulfilled by rotary dial and keypad input makes input fast and accurate. Voltage and current regulations by software, avoids human error and makes the PPS series more accurate.
Features
High accuracy, high resolution
Over load, over voltage, over current, over temperature and reverse polarity protections
Constant voltage and constant current operations, auto CV and CC switch
4.3-inch TFT LCD display
High speed rotary dial and keypad input
Built-in beeper alarm
Panel lock and output ON/OFF function
List mode function, 300 sets save & recall for voltage, current and time setups, easy use in auto test
Remote sense function
Display load resistance value
Battery charge mode
Standard USB host interface for data storage and recall from external USB flash driver
Standard RS-232 interface, support SCPI commands, support Labview
Standard 0-5V analog control
Optional RS-485 interface, support Modbus
Optional RS-232 to USB cable
Specifications
Model |
PPS-1560 |
PPS-3030 |
PPS-6015 |
PPS-3020 |
PPS-6010 |
|
Rated output (0℃~40℃) |
||||||
Voltage |
0~15V |
0~30V |
0~60V |
0~30V |
0~60V |
|
Current |
0~60A |
0~30A |
0~15A |
0~20A |
0~10A |
|
OVP |
0.1~18V |
0.1~34V |
0.1~64V |
0.1~34V |
0.1~64V |
|
OCP |
0.1~62 A |
0.1~34A |
0.1~17A |
0.1~24A |
0.1~12A |
|
Constant Voltage Operation |
||||||
Line regulation |
≤0.01%+4mV |
≤0.01%+3mV |
||||
Load regulation |
≤0.1%+5mV |
|||||
Ripple & Noise |
2mVrms, 30mVpp(20Hz~20MHz) |
|||||
Recovery time |
≤1.5ms (50% load change) |
|||||
Constant Current Operation |
||||||
Line regulation |
≤0.2%+3mA |
|||||
Load regulation |
≤0.2%+5mA |
|||||
Ripple & Noise |
≤10mArms |
|||||
Display |
||||||
Voltmeter |
5 digits LCD display |
|||||
Ammeter |
5 digits LCD display |
|||||
Setting resolution |
1mV/1mA |
|||||
Reading resolution |
1mV/1mA |
|||||
Setting accuracy |
Voltage |
±(0.03% of reading + 10mV) (25±5℃) |
||||
Current |
±(0.3% of reading + 10mA) (25±5℃) |
|||||
Reading accuracy |
Voltage |
±(0.02% of reading +5mV) (25±5℃) |
||||
Current |
±(0.05% of reading +10mA) (25±5℃) |
|||||
General |
||||||
Protection |
Over load, over voltage, over current, over temperature and reverse polarity protections |
|||||
Programming interface |
USB or RS-232, support SCPI commands, support Labview |
|||||
Memory |
100 sets |
|||||
Insulation |
Between terminals and chassis/other terminals: ≤60VDC |
|||||
Power source |
AC220V±10%, 50/60Hz |
|||||
Accessories |
Power cord x1, Operation manual x1, RS-232 cable x1, Software CD x1 |
|||||
Dimension |
215x89x412mm |
215x89x352mm |
||||
Weight |
5.5kg |
4.5kg |
All products by TWINTEX are tested and guaranteed to keep in good quality with one year warranty except wearing parts, such as test leads and power cords.
If quality problems happen during warranty period, we provide technical supports and spare parts. Our local distributor if any will help to solve your problems in time after receiving phone calls or emails.
Welcome to contact us at any time if any questions about using our products.
However, TWINTEX is free of responsibility to personal injuries or property damages caused by improper operation.