30MM*10MM ultrathin Air snail blower 5V/12 volt electric dc wind turbine for cleaner smart car
General Speci fication
Item |
Specification/Condition |
||
1 |
Mode1 No. |
MX3010GYM5 |
|
2 |
Outline. Dimension |
30*30*10mm |
|
3 |
Operating Voltage |
DC 4.5-5.5V |
|
4 |
Rated .voltage |
DC 5V |
|
5 |
Starting Voltage |
DC ≤3.5V on/off |
|
6 |
Rated current |
0.15A(MAX:0.18A) |
a. (Rated .voltage) b.25℃ 65% RH c.After testing for 5 minutes |
7 |
Power consumption |
0.75W(MAX:0.90W) |
|
8 |
Speed |
8500±15%RPM |
|
9 |
Max Airflow |
1.07CFM(MAX:1.31CFM) (MIN:0.94CFM) |
a. (Rated .voltage) b. AMCA(Standard) C. (Rated current) |
Air .Static Pressure |
5.83mmH2O(MAX:7.65mmH2O (MIN:3.89mmH2O) |
||
10
|
Noise Level |
|
a. (Rated Voltage) b. (Non-Echo Chamber) c. (Standard):CNS 8753 / ISO 3744 d. Test Condition :ISO 7779 e. (Distance): 1.0 M |
11 |
Life expectancy |
30000Hrs 25℃ |
MTTF (Mean Time To Failure) Conf. Level 90%) |
12 |
(No.of.Blade) |
|
|
13 |
(No.of.Pole) |
4 pole |
|
14 |
(Rotating Direction) |
anticlockwise |
|
15 |
Lock Protection |
YES |
|
16 |
Polarity Protection |
YES |
|
17 |
(Overvoltage protection) |
NO |
|
18 |
(Overcurrent protection) |
NO |
|
19 |
FG |
YES |
|
20 |
PWM function |
YES |
Blower advantages
1. Blower Because the impeller in the body operation without friction, no lubrication, the exhaust gas is not oil. Is the chemical industry, food and other industrial ideal pneumatic conveying gas source.
2. blower is a volume-operated blower. When used, with the pressure changes, little change in traffic. But the flow changes with speed. Therefore, the choice of pressure range is very wide, the choice of flow rate can be achieved by selecting the desired speed.
3.blower speed is high, the rotor and the rotor, the gap between the rotor and the body is small, resulting in less leakage, higher volumetric efficiency.
4. Blower structure determines the mechanical friction loss is very small. Because only the bearings and gear pairs have mechanical contact on the selection, the rotor, housing and gear ring has sufficient mechanical strength. Safe operation, long service life is a major feature of blower products.
5. blower rotor, have been static and dynamic balance verification. Finished products run smoothly, vibration is minimal.
For the past 11 years we have been focusing on the development and production of cooling fans
Shenzhen Topfan-China Development Technology Co., Ltd, and founded in 1996 in Shenzhen China, It's a professional manufacturer on DC AC brushless fans . Products support OEM, ODM andpassed CE, RoHS certificated and good sellers both at home and abroad, including Europe, North America, Asia ( Korea and India ) etc. The products, including axialfans, cross flow fans, blower fans, being widely used in the information technology, network communications as well as industrial equipment, medical equipment, home appliances and others.
Web : http://www.topfan-china.com
Alibaba : http://topfan-china.en.alibaba.com
Global Trade : www.equipment-coolingfans.com
1. If you want another rpm or voltage or special functionm Please contact with us directly . |
2. The size , voltage, power & speed can be made according to your requirements ! |
3. Could be made with waterproof function |
4. We're professional manufacturer of cooling fans for 11 years' experience |
5. On time delivery |
6. We offer 30000 hours warranty for sleeve bearing fans , 50000 hours warranty for ball bearing fans |
7. We can also provide fans with longer use time. |