300KW 100RPM Permanent Magnet Generator, Three Phase AC Alternator, Low Speed Magnet Generator
Engelec supply variety of permaent magent generators which is suitable for driven by following equipment to
We are manufacturer of wind generator, PMG permanent magnet generator, NdFeB permanent magnet generator for wind power system.
Features:
1. Low speed permanent magnet direct-drive generator. Do not need the gearbox. The turbine connects with the PMG directly, simplifying the structure and improving the system performance.
2. The gearbox reliability is not high. The system reliability can be improved if there is no gearbox. That means less maintenance, better utilization, longer lifespan for the system.
3. The efficiency is high. The system efficiency can be improved by 20% when you use PM generator without gearbox.
4. The PMG can work efficiently throughout the whole speed range. Less heat when working. The PMG can use natural air cooling.
5. Low start up torque, the system can output power at low speed.
6. The PMG works at low speed, low noise, more safe and reliable, the lifespan of the bearings can be longer.
7. The voltage, speed, power of the generator can be customized. The shape can also be changed, using spine shaft, dual shaft, front edge or other output ways.
Our main exporting countries: USA, France, Canada, Australia, Norway, Germany, Denmark, Italy, Spain, UK, Latvia, Romania, Korea, Iran, India, Pakistan, Thailand, Malaysia, Mauritius, Kenya, Brazil.
Specification
Main specifications | |
Rated power (kW) | 110kW |
Rated speed (rpm) | 500rpm |
Rated torque (Nm): | 2200Nm |
Rated voltage (V): | 400VAC |
Rated current (A): | 92A |
Startup torque (Nm) | <62Nm |
Pairs of poles | 6 |
Frequency (Hz) | 50Hz |
Phase | 3-phase |
Insulation Class: | H |
Protection Class | IP54 |
Efficiency(>%) | 95% |
Power factor | 1 |
Cooling | Natural cooling |
Mechanical specifications | |
Installation | Vertical |
Frame size | Y315 |
Weight (Kg) | 800kg |
Materials | |
Shaft material | Steel |
Bearings | Steel |
Housing material | Casting Iron |
Winding material | Copper |
Winding temperature level | 180°C |
Magnet | NdFeB |
Magnet temperature level | 150°C |
Core | High quality cold rolled silicon steel sheet |
Related products:
Generator type: Pemanent Magnet Synchronous Direct drive 3Phase AC
1500KW Wind Power Generator/ 125rpm100kW Low Speed PMG/350rpm110kW Wind Power Generator/ 500rpm100kW Vertical Wind Power Generator/ 350rpm300kW Wind Power Generator/20KW Pemanent Magnet generator
The specification could be
Customized Voltage, Speed, Power, Frequency.
Customized shaft size, Spline shaft, biaxial extension, flange can be used.
Varity structures design: vertical axis, horizontal axis, internal rotor, external rotor, plate type.