Applicable Industries:: Garment Shops, Building Material Shops, Manufacturing Plant, Home Use, Printing Shops, Construction works , Advertising Company, hydro pneumatic cylinder

Standard or Nonstandard:: Standard

Structure:: Piston Cylinder

Power:: Pneumatic

Body Material:: Aluminum

Place of Origin:: Guangdong, China

Brand Name:: CO-WIN

Product Name:: Hydro Pneumatic Cylinder

Bore Size:: 63/80/100/125/160/180/200mm

Power Stroke:: 5 ~ 25mm

Output Pressure Force:: 10~800KN

Stroke Speed:: 10~300 mm/s

Working Pressure:: 0.2-0.8MPa

Mounting Style:: Flange

Seals:: USA Herculesus

Warranty:: 1 Year

Supply Ability

Supply Ability:: 300 Set/Sets per Month Hydro Pneumatic Cylinder

Packaging & Delivery

Product Introduction

Overall Dimension Drawing

CW-A-1T Overall Dimension
Total Stroke	Power Stroke	L	L1	L2
50	5	298	453	344
100	5	348	553	394
150	5	398	653	444
200	5	448	753	494

50	10	298	453	394
100	10	348	553	444
150	10	398	653	494
200	10	448	753	544

50	15	298	453	444
100	15	348	553	494
150	15	398	653	544
200	15	448	753	594

50	20	298	503	544
100	20	348	553	544
150	20	398	653	594
200	20	448	753	644

Specification

Action type	Double action
Action pressure	Clean compressed air of 3-7kg/cm²
Action-wear hydraulicoil	Anti-wear hydraulic oil of VG 68#
Operation temperature	0-55℃
Operating speed	10-400mm/s
Anti-pressure of oil tank	300kg/cm²
Anti-pressure of pneumatic cylinder	12kg/cm²
Prepress stroke tolerance	+1.00mm 0.00mm
Power stroke tolerance	+0.20mm 0.00mm
Operation frequency	10-50 times (related to the specific pre-pressure and booster stroke)
High pressure Boosting force	1-80T(the actual output tonnage according to the customer demand)

Product Features

Working Principle

pneumatic cylinder is combined the oil pressure cylinder and booster together for taking pure gas press as the power source. It makes use of the different size of booster, the crosssection area compression ratio and Pascal energy conservation principle. Because of constant pressure, when the compression area change from small to large, the press would vary with the size, so as to raise the gas pressure to tens. Taking the prepress standard hydro pneumatic cylinder as an example: When the work gas pressed on the hydraulic oil (or working piston) surface, hydraulic oil would flow to the approach stroke cavity because of the air pressure, then the hydraulic oil would promote the workpiece to move rapidly. When the workpiece is meet the resistance larger than the gas pressure, it stops moving. At this point, the booster cavity start moving because of the signal (or pneumatic signal), then achieve the purpose of moding products!

Features:

Fast speed: The action speed is faster than the hydraulic drive and it is more stability than pneumatic drive;
High output: It can reach the highest output of oil hydraulic machine under same conditions, which can not be achieved by the pure pneumatic machine;
Low price: The price is lower than the oil pressure system;
Easy to maintain: The simple structure is easier to maintain than the oil pressure system;
Low energy consumption: When continue to boost or stop moving, it does not need the motor to keep working as the hydraulic system, then the energy can be saved. And it is convenient to take the power source, so the actual energy consumption is equivalent to 10%-30% of hydraulic power system;
No leakage: Energy conversion is easy with zero leakage, so not worry about the environmental pollution;
No harm to the die: In order to meet the technology needs, stamping pressure and the work stroke can keep within the provided area without adjustable levels;
Soft landing: Soft-stamping technology reduce the noise to protect the die;
Fault less: No temperature rising problems unlike the hydraulic system;
Small space: Space area can be less than 50% compare with normal air cylinder and hydraulic station;

Factory Display

Packaging