3 pin din connector power adapter For printer
Features:
Input Characteristics:
The range of input voltage is from 80Vac to 280Vac single phase.
Minimum/Nominal/Maximum/
Input Voltage/80Vac 100Vac~240Vac 280Vac
Input Frequency/47Hz 60/50Hz 63Hz
0.5Amax. @ 100-240Vac input & Full load/
2.3.Inrush Current (cold start)
30Amax. @ 264Vac input
72.4% min. @ Nominal input & Full load/(100-240Vac)&
2.5. Energy Consumption
At rated voltage100-240V,,non comsumption is less than 0.5
Environmental:
Output Specifications:
Protection Requirements:
Over Current Point Limited I>1.2A(100-240Vac)
The output shall hiccup when the over currents applied to the output rail, and shall be
self-recovery when the fault condition is removed
The input power shall decrease when the output rail short, the power supply shall no
damage, and shall be self-recovery when the fault condition is removed
The output voltage <19V when the output over voltage,.(the power supply shall damage)
Reliability Requirements:
The power supply shall be burn-in for 4 Hours under normal input and 80% rated load at
40°C± 5°C
The MTBF shall be at least 50,000hours at 25°C, Full load and nominal input condition
Note:
Compatibility:
Compatible with Epson pos printer parts and models: |
Compatible Epson part no.:
Compatible Epson pos printer Models:
|
Star Micronics pos printer models and parts |
Compatible Star Micronics part no.:
l PS60A-24B l PS60A-24A
Compatible Star micronics Model no.:
l TSP-600 l TSP613 l TSP643 l TSP651 l TSP654) l TSP-700 l TSP743 l TSP-700II l TSP-847. l TSP650 l TSP700II l TSP800 l TSP800II l TSP828L l TSP1000 l TUP900 l TUP500 l SP2000 l SP298 l SCP700 l HSP7000 l FVP10 |
Photos of product:
Test procedure:
100% burning in test before every single pieces of power adapter go out of our factory ,to control the defective to the lowest ,order with confidence !
Photo of our factory:
1.Assembly line
2.Packing production line
3.We produce transformers in our own factory,to control quality and delivery time better
photo of transformer production line: