Model Number | DTS726D-7P, DSS726D-7P RS485 |
Rated current (A) | 5A/CT, 1.5(6)A, 5(30)A,5(60)A,10(100)A or other as required |
Rated voltage (V) | 3*127/220V, 3*120/208V, 3*220/380V, 3*230/400V, 3*240/415V |
Connection mode | CT type or Direct type |
Staring Current | 0.004Ib |
Power consumption | <0.5W/5VA /each phase |
Impulse Voltage | 6kV 1.2μs waveform |
Display methods | LCD |
IP grade | IP20 |
Constant | 400~6400 imp/kWh |
Product Keywords | 3 phase kwh meter,3 phase energy meter with rs485,3 phase energy meter modbus |
DTS726D-7P, DSS726D-7P RS485 Three-phase Din-rail Mount Active Energy Meter
General
The meter is used in three phase four wire/three phase three wire /two phase threewire power grid. The meter is designed to measure AC active energy. All of itsfunctions comply with the relative technical requirement for class 1 three phase watthour meter in IEC62053-21. It is a long life meter with the advantage of high stability,high over load capability, low power loss and small volume. Basic Function
1.LCD display 6+2;
2.Bi-directional total active energy measurement ,reverse active energy measure inthe total active energy;
3.Pulse LED indicates working of meter, Pulse output with optical coupling isolation;
4.Loss phase LED indication, Reverse connection LED indication;
5.RS485 communication port, MODBUS-RTU protocol;
6.Energy data can store in memory chip more than 15 years after power off;
7.35mm din rail installation.