1. High heat transfer efficiency, low thermal resistance, stable performance
2. Low viscosity on both sides, easy to install and reusable
3. Excellent electrical insulation to protect electronic equipment
4. High and low temperature resistance, good compatibility;
5. Soft and flexible, low hardness, wide range of thickness, can fill any uneven size gap
6. Meet ROHS、UL and SGS environmental requirements.
Welcome to TradeChina
3.6W Thickness 0.5mm Thermal conductive pad gap filling materials cooling pad for laptop Led CPU GPU
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Product Description
Product Name | Silicone thermal pad |
Material | Japan raw material Silicone |
Function | Heat dissipation |
Package | Carton size: 400mm (L) * 200mm (W) * 120mm (H) Packaging details: The normal packaging is a carton, if the purchase quantity is small, we use simple packaging |
Japan raw material thermal conductive pad gap filling materials Thermal Conductivity 3.6W
Ultra-high thermal conductivity silica gel sheet is a high-performance thermal interface material, made of materials imported from Japan, used to fill the air gap between the heating device and the radiator or metal base. The product is produced by hydraulic press at 180℃, will not leak silicone oil in the high temperature environment, and the toughness of the product is very good, it is not easy to break when tearing. The product itself is slightly tacky, if you need to strengthen the adhesive can be based on customer requirements. The color of the product is mass-produced. If special color is needed, it can be adjusted according to the actual situation.
Thermal Conductivity ：3.6W/m.K
Standard size：200mm×400mm，Thickness：0.3—10.0mm
Thermal silicon pad can be coated with adhesive, insulating cloth, copper foil, aluminum foil on one side or both sides.
Glue type: standard glue/3M9448A/3M467
Can be processed into various specifications and any kinds of shapes according to customers’ demands.
____________________________________________________________________________________________________________________
Thermal silicone pad advantage
Typical applications
1. High reliability module new energy vehicle
2. Front end, high-speed hard drive, memory chip and graphics processor
3. Car equipment, charger
4. Between electronic components, such as semiconductors, ICs, CPUs, MOSs and heat sinks.
5. Telecommunications and communications equipment, LCD TVs, LED lighting, notebook computers, PCs, etc.
Parameters of Thermal conductive silicone pad
Properties | GP360-T03 | GP360-T05 | GP360-T10/15 | GP360-T20/25 | GP360-T30/100 | Test method |
Thickness（mm) | 0.3 | 0.5 | 1.0&1.5 | 2.0&2.5 | 3.0~10.0 | ASTM D374 |
Material | silicone ceramics | silicone ceramics | silicone ceramics | silicone ceramics | silicone ceramics | —— |
color | Light blue | Light blue | Light blue | Light blue | Light blue | Visuai |
Hardness（shore C） | 50±5 | 50±5 | 40±5 | 30±5 | 30±5 | ASTM D2240 |
Density（g/cm3） | 2.5 | 2.5 | 2.3 | 2.2 | 2.2 | ASTM D792 |
Tear strength （KN/m） | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | ASTM D412 |
elongation（%） | 100 | 132 | 135 | 134 | 143 | ASTM D374 |
Temp Range（℃） | -40—220 | -40—220 | -40—220 | -40—220 | -40—220 | EN344 |
Breakdown voltage （Kv） | ≥2 | ≥2.5 | ≧3 | ≧6 | ≧9 | ASTM D149 |
Volume resistivity （Ω·cm） | 1.5×1016 | 1.5×1016 | 1.5×1016 | 1.5×1016 | 1.5×1016 | ASTM D257 |
Dielectric constant （@1MHz） | 3.5 | 4 | 4.5 | 4.5 | 4.5 | ASTM D150 |
Weight loss（%） | ＜0.5 | ＜0.5 | ＜0.5 | ＜0.5 | ＜0.5 | @200℃240H |
Flame retardancy | V—0 | V—0 | V—0 | V—0 | V—0 | UL 94 |
Thermal conductivity （W/m.K） | 3.6 | 3.6 | 3.6 | 3.6 | 3.6 | ASTM D5470 |
Related Products
Packing&Shipping
Thermal pad Packaging:
1. PET film covered--protection .
2. Use paper card to separate each layer.
3. Standard export carton or customized.
4. Marked with customer's information or customized.
5. QC Department will strictly check whether the packing is safe enough for each shipment.
Thermal pad Shipping:
1. Through express delivery, such as DHL, UPS, FEDEX, etc. It is door-to-door and usually takes 3-5 days to reach its destination.
2. The flight to the airport usually takes 5-7 days.
3. Usually the transportation will take 15 to 20 days to reach the customer's factory.
Company Introduction
Hefei AOQI Electronic Technology Co., Ltd.: is established in 2008, it is an enterprise integrating R & D, die cutting, processing and sales. The company's main products include:Thermal Pad ,Thermal Grease,Thermally conductive mud,Thermal conductive double sided adhesive tape,super high conductivity of synthetic graphite film, potting adhesive, electromagnetic wave shielding material, copper foiltemperature materials, phase change material,conductive, insulation materials etc..
Our products have passed UL, RoHs, SGS, REACH and other three certification bodies, the company has passed ISO9001, ISO14001 certification.
We cooperate with Samsung, Foxconn, OPPO, millet, LG,BYD, BenQ, Changhong, AOC,Panasonic, Haier, Hisense, TCL, SKYWORTH, Philips .
We have a powerful R&D team.We can provide OEM & ODM service for clients.
We have the ability to provide the customers from the solution to the material selection and from the implementation of the manufacturing process to the related reliability performation test.All of our products thermal conductivity under reality test.
Certifications
Aoqi passed the international authoritative quality system certification and environmental safety system certification to ensure the quality and safety of customers. Such as: ISO9001: 2015, ISO14001: 2015, UL, RoHs, SGS, REACH and product patents.
Our customers
FAQ
Q1:Do you provide samples?
A1: Yes, we do, and could delivery in 24 hours after confirmation for stock.
And we can offer free samples. Just please pay the shipping fee.
Q2: Do you have MOQ?
A2: No MOQ for the standard product.
Q3: Are you factory or trading company?
A3: No, we are a professional manufacturer for over 12 years.
Q4: Will heat make the material softer?
A4: From -40°C to 220°C, there is no significant variance in hardness for silicone GAP PAD Materials and Gap Fillers.
Q5: What is the lead time for mass production?
A5: The lead time of mass production is about 5 - 7 days.
Q6: What is your payment method?
A6: Accept TT, Paypal, West Union, L/C, ect.
Q7: Can you provide finished product processing service?
A7: Yes, we can provide the finished product after die-cutting.
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier