3/4 Plastic Mechanical Cooling Tower Water Tank Float Valve
3/4 Plastic Mechanical Cooling Tower Water Tank Float Valve
About Self lock valve(Autolock valve):
The self lock valve is a new type float valve, there is a control hole on the float valve besides the outlet hole, so there is two hole of the self lock valve to control the water flow. The function of control hole is to control the flow of water , then make the pressure to the seals rubber of the outlet hole , finally the valve been closed by the water pressure. The advantage of this valve is that the control hole only control the flow of water, not close the water, so the control hole is very small. but the outlet seals hole is very big, so the self lock valve have a big flow rate than the strong lock valve.
- Easy Installation and Maintenance
- Accurate Water Level Control
- Good Performance:
- Quiet
- Stability
- Quick stop
- Long lifetime
- Non-polluting
- Less abrasion
- Corrosion-resistant
- Quick water flow rate
Other products you may be like
| Mode | 3/4" plastic float valve DN20CY |
| Install Size | 314.00mm(Maximum) |
| Thread | 3/4" Inch |
| Body Material | ABS(Acrylonitrile Butadiene Styrene plastic) |
| Float Ball Material | PE(Polyethylene) |
| Seals Material | SR(Silicon Rubber) |
| Working Pressure | 0.01- 1.5Mpa(0.1Mpa=1Bar=14.5Psi) |
| Working Temperature | 0-70°C |
The actual application depends on the specific circumstances
DN20CY plastic float valve can be installed in water tank, PE tank, water trough, water tower, cooling tower, irrigation, livestock, etc.
Loose the screw on the arm to adjust the float position and achieve the horizontal and vertical installation. Each of install method will not affect the performance.
Tips
1.If the body and pipe joint leak water, please check water tape is wrapped and the pipe joint is tighted.
2.The Strength should suitable when tight and fix the float valve, too much excessive strength will damage the valve.
3.Please check the water inlet filter regularly and remove the garbage out in time.
4.Please do not use the cleanser which will cause damage when clean the float valve.
Eight years export experience
Over 50 models of different float valves to choose
Our float valves have a variety of patent protection
Supply float valves to more than 500 clients overseas
The professional manufacturer water tank plastic float valve
Supporting OEM and ODM service
High temperature ,material requests, strong acid and alkali custom service.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier