2mm thickness stainless steel Glass bottle conveyor with water tray
This Glass bottle conveyor is designed for glass bottle and gallon bottle conveying.
1)Side board:304 stainless steel Thickness 2.5mm,Heightmore than160mm.
2)Motor:SEW
3) Belt:Reggina belt
4)Bearing:SU 304 Cover,NSK bearings
5)Transducer:Schneider
6)PLC:Schneider
7)Approaching switch:Omron
8)Electrical cabinet:Carbon steel spray
Electrical part requirement
Technical requirement
2.1PLC full automatic control
2.2Adopts helical turbine reduction motor, all motors are variable frequency speed motor IP55, insulation level: F
2.3Electric closet uses spray carbon steel material and meets IP54 function. The material is suitable for sealing completely. The main line should enter in from the below of the electric closet. 3 phase + midline + landlines. Above the ground 150 mm.
2.4All the motors adopt 2.5 mm four core cable, using gray blue line 0.5 mm
2.5All wires go into the motor through trunking which is made of 1.2 mm 304 stainless steel
2.6The installation of trunking is higher than conveying chain below
2.7Wire qualification slots, through 20 mm stainless steel tube connects motor sensor, connect the sensor joint rapid joint, can not directly bound docking. Transmission line or switch fuse must be of the waterproof connector
2.8All the electrical components to have marking, the line number
2.9No single part in changing the pressure set separate start stop reset switch.
2.10The whole line in personnel accessible area (the operator) to arrange a sudden stop switch, alarm lamp. Electricity installation party on 3 association-like signal lamp, and high alarm (85 dB above), must achieve fault alarm
2.11The cupboard door should paste English marked electricity safety tips logo.
2mm thickness stainless steel Glass bottle conveyor with water tray
1. Installation & adjustment
After the equipment are arrived at the customer's site, the customer is responsible for unpacking and arranging the equipment according to the placement drawing; and does under our install-adjust technicians' guidance. Costs of the staff are decided at last.
2. Training
1). We are responsible for offering the technical training to user. The training content includes the structure and maintenance of the equipment, control and operation of the equipment. Through training, users'technical staff can grasp and the skill of operation and maintenance proficiently, and deal with the general troubles in time. We will appoint qualified technical staff for the guidance.
2). The buyer can send staff to our company for learning.
3. Quality assurance
1). We guarantee the goods offered are brand-new, not used, with latest design and suitable material made, and we guarantee the specification of the equipment is consonance with the contract.
2). We guarantee the line achieve product technical performance indicators within 5 days after feeding operation through the correct guidance of the installation and commissioning.
3). We are responsible for the fault and damage of the production line caused by our design, technology, manufacture, installation, adjustment and material defect etc. that all belong to our responsibility.
4). The warranty period is 12 months after acceptance check of the production line. If there is any different between the furnished equipment in the customer's factory and the equipment concerned in the contract, the users have the right to pass the inspection book to the legal department to claim for compensation to our company within goods warranty period.
4. Warranty
Offer 12 months maintenance period to the problem that caused by our design, manufacture and the material quality, and offer the relevant parts and effective service for free for above reason. We will offer a widely and favorable technical support, after service all the time after guarantee period.
ZhangJiaGang City FILL-PACK Machinery Co.,Ltd. is loacated in Zhangjiagang city which is famous for beverage machinery producer collection. Intergrated the industry advantange and its own development in R&D, production, sales, after sales service, FILL-PACK is ready to serve more and more customers with our full range products and satified service.
FILL-PACK product is very critical in the choice of raw materials and spare parts. Korea 304 \ 316 stainless steel plate, ABB, SEW motors, Siemens, Mitsubishi, OMRON electrical control components, FESTO CAMOZZ the control valve, as well as international precision machining center for the fine quality of the machine foundation.
At present we produce: production lines for mineral water, pure water, fruit juice, tea drink, milk drink and carbonated drink with capacity 1000-20000bottles/hour; production lines for vinegar, soy sauce and wine 1000-20000bottles/hour; 3-5 gallon barreled water with capacity 80-1200 barrels per hour and various water treatment plants; We provide separate machinery or turnkey project.
Our product pass quality inspection executed by Bureau of Quality and Technical Supervision every year. Our factory is in accordance with ISO9001: 2000 certification system standards and we gain CE certificate for exportation to Euro countries. Our machineries are sold to more than 30 cities in China and over cross to American, Spanish, Hungary, middle east and African countries.
We help to set up your factory as our own home with our pure heart, we do to service, we learn to support!