LC-TYN-03-003 | ||
Solarpanel | 5V 290MA | |
Pump output | 18650 lithium battery 3.7V 2200mAH | |
Aeration pump: | DC miniature air pump 1.8V 150MA | |
Product working power range | 3.2V-4.2V 90MA | |
operating hours | About 20 hours | |
Charging method | Solar; 5V 1A power adapter | |
Instructions for use | Connect the air bubble stone to the vent hole and put it into the water that needs aeration. The solar cell faces the sunlight and there is no obstruction between the solar cell and the sunlight. Turn the switch to ON to turn on the oxygen pump and start working. When the sun is strong, the solar battery can charge the excess power into the internal battery and store it. When there is no sun, the battery is powered to increase the oxygen pump. This product can also charge the battery through a USB 5V 1A power supply. | |
Pay attention to things | 1. This product is an electronic product, the whole machine cannot be placed in water, and the diversion hole cannot be blocked. 2. The product needs to activate the circuit after replacing the battery before it can be used normally; the activation method is to place the solar battery in the sun for 5 seconds, or input 5V voltage from the USB charging port for 5 seconds. 3. This product is a solar product, and the charging speed is related to the intensity of sunlight. Regular cleaning of the dirt on the solar cell can improve the charging efficiency. |