2kg Polyurethane washable fabric better tensile strength waterproof paint

better tensile strength  polyurethane waterproof paint for aquaculture, reservoir

Polyurethane waterproof coating, which is regarded as fluid rubber in waterproofing products, and is appreciated by building waterproofing industry both China and abroad with its good physical and chemical performance, and is also recognized one of best performance waterproof coating and widely to be used all over the world, especially in many great civil and military programs, like tunnel, railway, underground parking, air-raid shelter, water treatment, etc.

E-969 single-part moisture cured PU waterproof coating, the product which researched and developed by our company in view of special engineering purpose, is the upgrading product in single-component polyurethane waterproof area. It does not contain harm and toxic solvents like “tri-benzene” and volatile solvents, satisfying national VOC mandatory limitation standard on volatile solvent and “Safety Evaluation of Drinking Water Distribution Equipments and Protective Materials Standard” (GB/T17219-1998). It has excellent storage stability which overcomes the shortage of this kind of waterproofing coating--over-thin or over-thick due to bad storage stability.

Features of product

• The time of drying and curing is two times as fast as general single-part PU waterproofing coating, which could greatly shorten the construction period
• More scientific and precise control for its viscosity, little deposit is produced so that the waste of coating can be substantially reduced

• Good performance of physical mechanics, its tensile strength, extension rate are far over GB standard of typeⅠandⅡ.
• Various performance indexes are excellent, but its price is reasonable compared with the domestic similar products. So its performance-to-price ratio is high.
• Almost no smell, especially suitable for poor ventilation environment

Applicable scope:

For important waterproof engineering, drinking water pool, aquaculture, special pool, swimming pool, water pipes, with requirements of environmental protection waterproof engineering on groundwater, etc.

Advantages of construction: 

• The time of drying and curing is obvious shorter than national standard, which is good for construction period;
• The coating is dry and not re-sticky after curing;
• Not containing toxic and harm solvents like methylbenzene, di-methylbenzene, tri-methylbenzene, etc;
• Not containing volatile solvent and strong smell;
• High solid content (up to 98%);
• Good performance of physical mechanics, satisfying all indexes of typeⅠandⅡwaterproof coating.
• Can be exclusive used or can be used with other waterproof membrane

Performance index