Model(YKDA-HT***) | 1000 | 2000 | 3000 | 4000 | 5000 | 6000 | 8000 | ||||||||
Rate Capacity(KVA) | 1 | 2 | 3 | 4 | 5 | 6 | 8 | ||||||||
Rate power(W) | 800 | 1600 | 2400 | 3200 | 4000 | 4800 | 6400 | ||||||||
DC Input | Rate input voltage | 110VDC | 24V | ||||||||||||
Rate input Current | 9 | 18 | 27 | 36 | 45 | 55 | 72.7 | ||||||||
Shut down voltage range | 90V~135V | 20V—30V | |||||||||||||
Start-up voltage range | 104V~131V | 22V—28V | |||||||||||||
Reflect noise current | ≤10% | ≤10% | |||||||||||||
AC Input | Allow bypass voltage | 260V-180V(±10V) | 220Vac±15% | ||||||||||||
Rate input Current | 4.5 | 9.1 | 13.6 | 18.2 | 22.7 | 27.3 | 31.9 | ||||||||
Bypass switch time (ms) | ≤5ms | ≤5ms | |||||||||||||
Rate output voltage and frequency | 220Vac,50Hz | 220Vac,50Hz | |||||||||||||
Waveform | Pure Sine Wave | Pure Sine Wave | |||||||||||||
Rate output current | 3.6 | 7.2 | 10.8 | 14.5 | 15.9 | 19.1 | 22.3 | ||||||||
Output voltage precision | 220VAC±1.5% | 220VAC±1.5% | |||||||||||||
Output frequency precision (Hz) | 50Hz±0.1% | 50Hz±0.1% | |||||||||||||
Waveform distortion (THD) | ≤3% (linear load) | ≤3% (linear load) | |||||||||||||
Dynamic respond time | 5% (Load0←→100%) | 5% (Load0←→100%) | |||||||||||||
Power factor (PF) | 0.7/0.8 | 0.7/0.8 | |||||||||||||
Overload ability | 120%,30s | 120%,30s | |||||||||||||
efficiency | ≥85% | ≥85% | |||||||||||||
Insulating intensity | 1500Vac,1min | 1500Vac,1min | |||||||||||||
Noise (1m) | ≤40dB | ≤40dB | |||||||||||||
Operation temperature | -5℃~40℃ | -5℃~40℃ | |||||||||||||
Humility | 0~90%, non condensing | 0~90%, non condensing | |||||||||||||
Operation altitude | ≤1000m | ≤1000m | |||||||||||||
Cooling mode | Forced wind cooling | Forced wind cooling | |||||||||||||
Inverter status | Mains supply is normal, invert normal, battery under voltage, output overloading | Mains supply is normal, invert normal, battery under voltage, output overloading | |||||||||||||
Protect function | Input under/over voltage, output overloading, short circuit, city power high-low voltage protection | Input under/over voltage, output overloading, short circuit, city power high-low voltage protection | |||||||||||||
Output mode | Terminal block | Terminal block |