CONTACT US |
2K Auto Refinish Car Primer Surfacer
606-2K Primer Surfacer Characteristic:
1.Multi-purpose two-component 2K Primer Surfacer with strong filling power,
2. Fine adhesion between coats, fast drying time, easy sanded.
Substrates | Dried and sanded existing finishes, all kinds of primer and putty. | ||
Surface Cleaning | Wash by warm soap, remove wax, silicon and other contaminations with degreaser, sanding with P800-P1000, wash with clean water then keep dry; again with degreaser. | ||
Mixing Ratio | 2K Primer Surfacer | Hardener | Thinner |
4 | 1 | 1-1.5 | |
<15℃ | 606 2K Primer Surfacer | 106 2K Primer Hardener | 62 Fast Thinner |
15-30℃ | 606 2K Primer Surfacer | 106 2K Primer Hardener | 62 Standard Thinner |
>30℃ | 606 2K Primer Surfacer | 106 2K Primer Hardener | 62 Slow Thinner |
Pot-Life | At 20°C, 3 hours mixed with hardener, thinner | ||
Spray Viscosity | 14-16s to drop off, in 4# viscosity cup at 25°C, | ||
Spray Gun Set Up | Gravity Feed: 1.2-1.5mm 4-5kg/cm2 Suction Feed: 1.4-1.6mm 4-5kg/cm2 | ||
Spray Technology | Coats&Thickness: 2-3 coats, total 20-30um. Flash-Off Time: At 25°C, 5-10 minutes between two coats,it depends on temperature and paint film. | ||
Drying Time | A. Allow 10-20 minutes air-drying,then 60°C baking 20 minutes, can sand after cool down. B. Air-drying time 3 hours, at 20°C. | ||
Shelf Life | 2 years in original sealed can, cool and dry place at 25℃. | ||
Package | 1L×12 or 3.75L×4 |
Note:
1. The substrate must be cleaned and sanded before spray, wet sanding P800-1000 and then dry.
2. At ambient temperature higher than 30℃, add appropriate Retarder Solvent into thinner to
avoid blushing. For more details, please refer to technical data sheet of Retarder Solvent.
3. The products mixed with hardener should be used up soon and can not be restore for future
use; clean equipments immediately with thinner after application, otherwise it is very difficult tobe cleaned after dry.
our factory:
we have the complete production line,to be the employee's safety,we demand they must be with gas masks in the workhouse, also we have the QC department to measure the quality of the produce in the dry room,so you can safely use our product,Hope your life will better than before.
1. Good products at reasonable price.
2. Updated color mixing system.
3. We attend exhibition to promote our products all over the world, to help our distributors to promote in their local markets.
4. We visit our distributors and big customers for collecting their news trends in car painting and suggestions for a better development of our products.
5. We arrange all the export procedures for our customers to ensure their container safety packed and safety shipped.
6. Free samples are always available as per your needs.
Our Company Has Been Certificated GB/T19001-2008,ISO9001:2008 And TST16949.
1.One of the largest exporter & manufacturer of automotive refinish paints in China .
2. High increase annually in overseas market .
3.Huge group of distributors in 50 countries all over the world and domestic market.
4.Modern and innovative brand in Car Paint Industry.
5.Strict quality control and steady product performance .
6.Great brand image, advanced color mixing system and excellent customer service system.
1. Are you factory?
We are 100% Car Paint manufacturer of Car Paint in South China, located in Guangzhou which takes only 40 mins drive from the Airport.
2. How can we visit your factory?
You can contact us to confirm the arriving time and we will send driver to pick you up at hotal.
3. How to assure product quality and quantity?
Each production process are checked by QC departments, the chemical raw material and products are stored in good warehouse, in case any rains, direction sunshine,etc.
4. What kind of certificate do u have?
GB/T19001-2008, ISO9001:2008,ISO/TS16949.