2G10 LED 24W 4 pin dulux bulb
2G10 LED 24W 4 pin dulux bulb
Suitable for replacing Dulux F CFL lamp in luminaire with ECG
From Original Design Manufacturer in Taiwan
Electronic ballast compatible 2G10 LED bulb can help directly replace conventional 24W DULUX F CFL. No more fixture rewiring. No more ballast bypassing. With two built-in fuses installed in place, the installation can be safe, simple, easy. Perfect LED CFL solution for downlighting fixtures in many applications of general lighting. ECGsmart 2G10 series LED lamps are not only suitable for operation on electronic control gear, but also can help reuse the lighting fixtures by replacing old ballast with LED driver. When the LED CFL or LED drivers come to the end of life, you can just replace them with new one from off-the-shelf market. Everything just functions like the old days. No need to worry about the availability of LED lamp or its driver. The ECGsmart series LED CFL is not suitable for connecting with AC mains (85V~265V) or conventional control gear(CCG).
(Model: ECGsmart 2G10 12W LED Lamp)
l Help instantly replace old 2G10 fluorescent 24W DULUX F CFL
l Function with ECG (electronic control gear) in existing luminaire.
l Suitable for most of DALI dimming ECG ballast
l Off-the-shelf LED driver compatibility to help replace ECG in the future
l Save more on energy consumption
l Better color consistency quality of light
l Higher lumen efficiency
l Longer life time up to 50000 hours
l CE and RoHS compliant
l Note: Not allow to connect with AC mains (85V~265V) or conventional control gear(CCG).
|
Ballast Compatible ECGsmart 2G10 12W LED DULUX F |
|
|
Descriptions |
Value |
|
Direct Replacement Target |
Fluorescent 2G10 24W DULUX F CFL |
|
Driver Compatibility |
Electronic ballast, LED driver |
|
Ballast Driving Voltage |
Upon ballast output |
|
CC LED Driver Output Voltage |
33V DC |
|
CC LED Driver Output Current |
320mA DC |
|
Wattage |
12W |
|
Conventional Wattage Equivalent |
24W DULUX F CFL |
|
Base Cap |
4 pin 2G10 |
|
Life Time (Hours) |
50000 hrs |
|
Beam Angle (Degrees) |
140 |
|
Lumen Efficacy |
150 lm/W |
|
Lumen output |
1800 lm |
|
Housing material |
Aluminum or plastic |
|
PC cover |
Clear / Milky |
|
Length |
135 mm |
|
CRI |
> 82 |
|
CCT |
2700K ~ 6500K |
|
Product Model: ECGsmart 2G10 12W LED lamp |
|
|
Order number |
Direct Retrofit Target |
|
ES-2G10-12W27K-AL |
Fluorescent 2G10 24W 2700K DULUX F CFL |
|
ES-2G10-12W30K-AL |
Fluorescent 2G10 24W 3000K DULUX F CFL |
|
ES-2G10-12W40K-AL |
Fluorescent 2G10 24W 4000K DULUX F CFL |
|
ES-2G10-12W50K-AL |
Fluorescent 2G10 24W 5000K DULUX F CFL |
|
ES-2G10-12W60K-AL |
Fluorescent 2G10 24W 6000K DULUX F CFL |
|
ES-2G10-12W65K-AL |
Fluorescent 2G10 24W 6500K DULUX F CFL |
Electronic ballast compatible 2G10 LED bulb can help directly replace conventional 24W DULUX F CFL. No more fixture rewiring. No more ballast bypassing. With two built-in fuses installed in place, the installation can be safe, simple, easy. Perfect LED CFL solution for downlighting fixtures in many applications of general lighting.
ECGsmart 2G10 series LED lamps are not only suitable for operation on electronic control gear, but also can help reuse the lighting fixtures by replacing old ballast with LED driver. When the LED CFL or LED drivers come to the end of life, you can just replace them with new one from off-the-shelf market. Everything just functions like the old days. No need to worry about the availability of LED lamp or its driver. The ECGsmart series LED CFL is not suitable for connecting with AC mains (85V~265V) or conventional control gear (CCG).
ECGsmart series 2G10 LED tubes also function with external dimmable or non-dimmable LED driver so as to help transition towards the full LED lighting era. The transition between ECG and LED driver is seamless and painless, which will allow the existing fixture to stay and be reused in the current application. The areas of application can be many, such as shops, restaurants, hotels, apartments or homes.
My company has in-depth LED product expertise and many years’ experience in applications, as well as establishes longstanding customer relations. We stay focus on lighting trends and their requirements and provide series of LED products, especially in electronic ballast compatible arena. Our product portfolio is driven to meet the demands from application requirements. Welcome to contact with our lighting specialist to know more about our electronic ballast compatible LED solutions and more.
Benson Energy Saving Technology ( BEST) is an original design manufacturer located in Taiwan. We design the innovative T5, T8, G24 and 2G11 LED retrofit products just like fluorescent ones. In other words, our retrofit products have exact the same parameters as FL, just with better LED light engine and without LED driver inside.
In response to global climate change and the unstoppable trend of low-carbon economy, the BEST has seriously taken social responsibility of environmental protection as our mission. We promote ” Lumiaire Reuse Initiative” to avoid emerging E-WASTE disaster and try to give “old luminaire a new life.” The concept can be said as “ Reuse the lumininaire. Save the planet. Light the future.”
The BEST owns unique patents for LED retrofit products which can directly replace traditional ones, especially in low pressure discharge lamps. Our approach is simple and easy to help people reuse existing usable light fittings and keep on the track of circular economy.
The product strategy is based on the core technology of electronic ballast (ECG) compatibility to develop two major series of LED lamps: ECGsmart series and ECGall series. ECGsmart series , including T5,T8,G24,2G11 LED lamps, not only work with ECG, but also function with external dimmable LED driver so as to meet the needs of future smart lighting. The transition between ECG and LED driver is seamless and painless as well as follow the trend of circular economy. ECGall series, also covering T5,T8,G24,2G11 LED lamps, have multi-functional compatibilities. Except the ECG compatible, ECGall can function with CCG( T8 only), direct AC main power or external non-dimmable LED driver to meet users’ different application needs.
Company Culture
Our Belief:
To be ”Impartial and Righteous” company. To produce “Innovative and Excellent” product. To inspire “Diligent and Enthusiastic” employee. To have “Caring an Commitment” to Society.
Our Vision:
Preserve and protect the nature of earth to create more eco-friendly environment for our next generation.
Our Mission:
To be a leader in global lighting industry by continual innovations
Our Strategy:
Innovate quality, energy-saving and eco-friendly products to exceed customer’s expectations and contribute to social responsibility.
Our quality policy:
To create excellent quality and provide the most competitive products
To meet customers’ needs and ensure their satisfactory
To involve everyone and implement continual improvement
BSET ECGsmart G24q retrofit LED bulb
Suitable for replacing G24q CFL lamp in luminaire with ECG
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier