277 Glitter Paste
1 Summary
Category: Glitter Paste
Feature: High fastness, high shining degree, easy to use , no delamination with our paste, suitable for flat screen machine and rotary screen machine manually cloth printing
Fabric: Suitable for elastic cotton, poly, nylon, lycra fabic and knitted fabric.
Storage: Keep in cool and ventilated place at 5-35 centigrade, well sealed for 6 month.
Eco status: Meet GB 18401. OEKO-TEX 100 certificate, adidas A-01, Nike RSL.
Technical specification:
Code No Technical data | 277 | Reference standard/ method |
Appearance | White paste | Visual Inspection |
viscosity /cp |
| Brookfield RVDV-2T viscometer |
Weight |
| hydrometer jar |
pH value | 6.0-7.0 | GB/T 7573-2009 |
pH value(fabric swatch) | <20 | Oeko-tex standard 100、Adidas A-01 |
formaldehyde /mg/kg | not detected | |
Soluble heavy metal /mg/kg | not detected | |
AP/mg/kg | not detected | |
APEO/mg/kg | not detected | |
Phthalate /mg/kg | not detected | |
Organo-tin compound /mg/kg | not detected | |
AZO/mg/kg | not detected |
Notes: For detailed eco-friendly status , please refer to the test report.
not detected =less MDL
2.Instruction
2.1 Formulation
Product Name | Formulation /%
|
277 | 80 |
flicker pieces | 20 |
Remarks: the above formulation is our suggestion , clients can adjust according to the actual situation, and test if the fastness is reach the requirement. |
2.2. Printing technology
2.2.1 Printing condition
A.To reach the best result, we suggest to print at moisture condition of 50-80%,and note the impact of temperature to operability . Please make sure to extend the curing time when moisture is higher than 80% to avoid stickness and poor washing fastness. When moisture is less than 50%, we suggest to add MDR wetting agent to avoid the chocking problem.
B.Squeegee:75 hardness oil based
C. Mesh :40-80 mesh
D. Curing: at 130-140℃ X 90s ,heat press 135℃ X 10s
2.2.2 Printing process
2.3 Notes:
A.Please add 1-2% PC600 fixer if you need to increase the fastness. Make sure to stir evenly and use up the mixed inks within 72 hours. Please test the compatibility if your fixer is from another company.
B.982 render paste is for Modal /Odile fabric base, 985 render paste is for mercerized cotton base.
3 Property of Finished Printed Fabric
3.1 Conditions for Making Mesh
Testing size:200*200mm real printing
Testing fabric:100% cotton
Printing condition: 2 times printing, 2 squeegee each time
Curing condition:135℃X90s
Testing item | 277 | Testing method |
Softness | 3grade | Inner standard: 5grade:super soft, 4 grade:relatively soft 3 grade: soft 2 grade: slightly stiff 1 grade: stiff |
Elasticity | 3grade | Inner standard: 5grade:very good 4 grade:good 3 grade: normal 2 grade: bad 1 grade: worse |
Gloss |
| ST-BD |
Inoxidizability | Good |
|
Machine wash fastness | PASS | Use Libai detergent powder 5kg wash at 60 centigrade, 1200 Speed. Standard washing 2.5H :5 times washing/ 5 times curing. |
Overlap sticky test | No sticky and broken on surface | Press the overlap printed fabric at 80 centigrade for 24 hours at 5kg weight. Then peel off till the temp back to normal |
Notes: All the tests above are based on certain conditions. Make sure to do the trial test before mass production.
For any questions, please contact our company for details. We keep the right to amend the manual without prior notification.
Packing :20/50kg per drum
Shipping: one week after received the t/t payment or L/C documents.