Genset Technical Data |
|
Prime power |
25KVA |
Standby power |
30KVA |
Rated speed |
1500 RPM |
Output frequency |
50 Hz |
Phase |
3 |
Rated voltage |
400 V |
Engine model |
4B3.9-G2 |
Alternator model |
GM-20-4 |
Cummins Diesel Engine Technical Data
Engine Model |
4B3.9-G2 |
Configuration |
4 cycle , 4 cylinders in line |
Aspiration |
Turbocharged after water-cooled |
Bore×Stroke |
102 x120 mm |
Rated speed |
1500rpm |
Displacement |
3.9 L |
Compression Ratio |
16.5:1 |
Prime Power |
25KW |
Standby Power |
27KW |
Speed Governor |
electrical |
Cooling System |
Water-cooled |
Speed Stability (%) |
≤5% |
Fuel Consumption at 100% Load |
216g/kw.h |
Starter Motor |
DC24V |
Marathon Alternator Technical Data
Alternator model |
MP-20-4 |
Alternator manufacturer |
Marathon |
Exciter type |
Single bearing, Brushless, Self-excited |
Rated output prime power |
20 kW |
Rated speed |
1500 RPM |
Rated frequency |
50 Hz |
Phase |
3 |
Rated voltage |
400 V(Available with customer requirements) |
Power factor |
0.8 |
Voltage adjust range |
≥5% |
Voltage regulation NL-FL |
≤±1% |
Insulation grade |
H |
Protection grade |
IP22 |
Control System HGM6110
All FENGFA gensets have a control cubicle (the smart gen HGM6110 as standard) mounted on a isolated support, which has the following features.
Electronic digital control module with monitoring/control facility and warning indicators
Automatic shutdown protection
Emergency stop button (lock-down type)
AC output circuit breaker with over-current protection
DC circuit control switch
The control module display
Generator voltage
Output frequency
Engine speed
Battery voltage
Engine run-time (Hours)
Note:
1. The engine coolant temperature displayed by water temperature gauge