RF 25A 300W 600W T2 PWM LED dimmer knob
RGB controller Wireless RF controller IR remote controller LED dimmer,
RGB amplifier SPI controller LED Audio Controller DMX512 decoder
Constant current RF dimming driver for DIM/CCT:
RF 2.4G SYNC dimming driver (DIM) RF 2.4G SYNC dimming driver(CCT)
RF 2.4G remote control RF 2.4G multiple-zone remote control
Our advantage:
HX-T2(Only receier)
Single Color Dimmer
Single color dimmer can achieve stepless dimming. It adopts the knob control manner. According to actual needs, users can transfer the light to the appropriate brightness.
Product Feature
l Working voltage: DC12-24V, Max. output current up to 25A, 300W/12V, 600W/24V.
l RF frequency 2.4GHz, Wireless-sync-control.
l Supports both manual knob dimming and remote control.
l PWM frequency is adjustable (6 levels: 500Hz,1KHz, 2KHz,4KHz, 7.8KHz, 15.6KHz).
l Adopt the knob control manner, soft dim function, display the brightness.
l According to actual needs, users can transfer the light to the appropriate brightness.
l Short-circuit protection.
l 3-year warranty.
Technical Parameters
Working temperature |
-20-60℃ |
Supply voltage |
DC12-24V |
Output |
1 channel |
Static power consumption |
<1W |
Max. output current |
25A |
Max. output power |
300W/12V; 600W/24V |
Net weight |
65g |
External dimension |
L103*W40*H24 mm |
Gross weight |
90g |
Packing size |
L140*W48*H35mm |
Memory function |
Yes |
PWM frequency |
2KHz (factory default),500Hz,1KHz, 4KHz, 7.8KHz, 15.6KHz |
Max. output current |
PWM<=2KHz: 25A PWM=7.8KHz: 15A PWM=15.6KHz: 10A |
Max. output power |
PWM<=2KHz:300W/12V; 600W/24V PWM=7.8KHz:180W/12V; 360W/24V PWM=15.6KH:120W/12V; 240W/24V |
Control method
This product supports both manual knob dimming and remote control dimming.
Remote control compatible is: HX-RFBT10 (4 zone, adjust PWM value) HX-RFBT-DIM-2.4G(Single zone)
Dimmer can be controlled by any one the same remote as factory default; remote control delivered with unique RF code as factory default; if unique-control is needed, please matching the code before installation and using. Please refer to the corresponding remote-control manual for operation instruction in detail.
Connection port instruction:
Direction for use
Wireless-synchronization function
Receivers will transmit the control signals from the remote control and self-inspection the work statues for each other, so multiple receivers in same zone will wireless-sync-work completely.
Typical Applications
Application Circuit:
Precautions
1.The working voltage is DC12V~24V, and it must not be connected to other voltages;
2.Ensure that the wiring is correct and no short circuit before power-on;
3.It supports wireless-sync-dimming by remote control, please refer to the remote control setting manual for details;
4.PWM dimming frequency is adjustable via remote control. The maximum output load power corresponding to different PWM frequencies is different. Please do not overload it.
PWM Frequency Adjustment operation :
Press and hold the remote control “Set” for 10 seconds after switch off the dimmer by remote control(the dimmer is in off state) within10 seconds, display will show as: P***. Means enter “PWM adjusting” state. Press Brightness+/- keys to adjust the PWM frequency, there is 6 levels optional, pressing “Set” button again to save it after finish the setting operation. Then the dimmer return to power on state.
Please note: PWM setting operation should be finished within 1 minute, Will automatically exit PWM adjusting status without save it after 60 seconds.
5.Warranty of this product is three years, exclude the artificial situation of damaged or overload working.
Packaging & Shipping