1.Pictures Of mva power transformer
2.Descriptions Of mva power transformer
transformer power transformer oil immersed transformer electric transformer | |
1 | Power transformer 220kv 110kv and 66kv low-loss series |
2 | low loss, low noise, high reliability |
3 | Iron core is made of cold-rolled silicon-steel |
4 | Have good ability withstand short-circuit |
5 | The oil tank is bell type with the structure of full folding plate type, |
6 | Having an excellent exterior and easy for maintenance |
7 | Adopting capsule-type oil container, it can reduce oil aging to the lowest degree |
8 | Power loss: no-load loss is 30% lower than that of IEC standard |
9 | Reliability: All in-service product have no damages or oil leakage occurred |
5.Technical Parameters Of Product
Power transforer main Technical Parameters for 110kV power transformer Level S(F)S9, S(F)S10, S(F)S11 Serie
power transformers three-phase three winding no-load-tap-changing power transformer:
Rated power (kVA) |
High Voltage (kV) |
H.V Tap range |
Low Voltage (kV) |
Connection Symbol |
Short-Circuit Impedance (%) |
No-load Loss (kW) |
On-Load Loss (kW) |
No-load Current (%) |
||||
9 Type | 10 Type | 11 Type | 9 Type | 10 Type | 11 Type | |||||||
31500 | 220 242 |
±8×1.25% ±8×1.5% |
6.3,6.6, 10.5,11, 20,34.5, 35,37, 38.5,66, 69 |
YNd11 | 12~14 | 38 | 34 | 30 | 135 | 128 | 128 | 0.7 |
40000 | 45 | 41 | 36 | 157 | 149 | 149 | 0.63 | |||||
50000 | 54 | 49 | 43 | 189 | 180 | 180 | 0.56 | |||||
63000 | 63 | 57 | 50 | 220 | 209 | 209 | 0.56 | |||||
90000 | 80 | 72 | 64 | 288 | 274 | 274 | 0.49 | |||||
120000 | 99 | 89 | 79 | 346 | 329 | 329 | 0.49 | |||||
150000 | 116 | 104 | 93 | 405 | 385 | 385 | 0.42 | |||||
180000 | 135 | 122 | 108 | 468 | 445 | 445 | 0.42 |
6.Certifications And Workshop Of Product
7.Parts Of Product
Core | 1 | Power transformer core is made of high-permeable grain-orientated top quality cold-rolled silicon sheet |
2 |
The material is cut with advanced Germany Geoge GmbH automatic shear line with the cut burrs controlled within 0.02mm. | |
3 | Power transformer silicon sheet fabrication adopts “no-upper yoke-lapped’ technology and all lapped joints of the silicon sheet are 45 full-miters | |
4 | Effectively improves no-load performance and reduces noises. |
Coil | 1 | The high-voltage(HV) coil adopts an interleaved-continuous structure to improve the voltage characteristics under impact voltage and make voltage evenly distributed. |
2 | All stays and pads are chamfered to keep highly reliable insulation. | |
Oil tank and accessories | 1 | Power transformer tank wall adopts wide steel sheet |
2 | Which will be folded into corrugated structure without splicing | |
3 | In this way welds aredecreased and mechanical strength is enhanced | |
4 | The corrugated wall has diverging effect, and thus plays arole in decrease of noise. |
8.Installation And Packing Of Product
9. Our Best Service For You
1. | Pre sale service |
a. | make technical solution |
b. | send quotation, technical data sheet and drawing |
c. | prepare power transmission plan, testing plan,and shipment plan |
2. | In sale service |
a. | supervise the manufacturing schedule totally in accordance with the plan |
b. | send photos to customer during every manufacturing process(hold point) |
c. | inform the customer one week before testinng. |
3. | After sale service |
a. | installation and commissioning, training the workers |
b. | quick response within 12 hours any time |
c. | provide 12 months gurantee period normally. |
3.FAQ For You
1. Q: | What is your delivery time ? |
A: | Depend on the type of transformer. |
2. Q: | What is your payment term? |
A: | 30% advance by T/T , 70% before delivery by T/T or L/C or we can discuss about it. |
3. Q: | What kind of starndard you follow? |
A: | IEC, ANSI, CSA, GB, etc |
4. Q: | What kind of supporting documentation you can provide normally |
A: | Quotation,outline drawing,manufacturing plan, quality control plan testing plan, financial report, type test report(KEMA, CESI),reference list,etc |
5. Q: | What is your normal wanrranty period? |
A: | 12 months after transformer operation. |
6. Q: | Can u do installation and commissioningin user's site? |
A: | Yes, we can send our installation team to user's country for service. |
7. Q: | Do you have any experience in this kind of transformer? |
A: | Yes, we can provide reference list for check. |
8. Q: | Are you manufacturer or trading company? |
A: | Manufacturer and Trading company. |