Product Specifications
Kapton Heaters can easily be designed to accommodate a variety of components such as thermostats, thermal fuses, thermocouples, thermistors, RTDs, or specialty wiring harnesses. Typical applications for Kapton heaters include medical diagnostic instruments, LCDs, analytic test equipment and military equipment.
Tag:Heating film for moto grips bespoke flexible heater mats,Flexible Etched heating film,flexible Kapton heating film ,flexible heating element
flexible Kapton heater,Etched Foil Heaters,Kapton (Polyimide) Heaters,Customized Polyimide Heaters
Key Specifications of flexible heating element:
Heater type | Insulation materials | Max thickness | Max watt densities(w/cm2) | Voltage |
Dielectric strength |
Temperature range |
Application |
Polyester heater/Pet heater | polyseter/PET Film | 0.3mm | 2.5 | 1.6~380V | 1000VRMS | -32~130 ℃ | PET is special for its stability in vacuum & solvent resistance, often used in medical & aerospace applications. |
kapton heater/polyimide heater/PI heater | kapton /polyimide/PI | 0.3mm | 7.8 | 1.6~380V | 1000VRMS | -150~200 ℃ | KAPTON is special for its stability in vacuum solvent resistance, often used in medical aerospace applications |
silicon rubber heater | fiberglass silicon rubber | 0.5~0.9mm | 5 | 1.6~380V | 1000VRMS | -45~230 ℃ | Silicon rubber, often vulcanized to a metal part and be used in industrial and commercial applications |
mica heater | mica sheet | 0.8~1.3mm | 17 | 1.6~380V | 1000VRMS | -150~600 ℃ | Mica has many properties of KAPTON. It usually used on cup warmer , iron and any other high temperature product. |
transparent heater/thermal clear heater | polyester/PET Film | 0.3mm | 8 | 1.6~380V | 1000VRMS | -55~120 ℃ | Transparent films that cand be used for a variety of application, including LCD, touch panel, switch glazing and goggles |
Partial Heating panel specification (all specification can be customized.Max watt density:17.5w/cm²) | ||||
Width(mm) | Length(mm) | Volts(v) | Wattes(w) | Availablity |
13 | 50 | 28 | 5 | stock |
1 | 1 | 28 | 5 | stock |
1 | 3 | 28 | 15 | stock |
1 | 5 | 120 | 25 | stock |
1 | 15 | 120 | 75 | stock |
2 | 10 | 120 | 100 | stock |
3 | 5 | 120 | 75 | stock |
4 | 4 | 120 | 80 | stock |
5 | 5 | 120 | 125 | stock |
8.5 | 31 | 3.7 | 13.69 | stock |
20 | 31 | 3.7 | 13.69 | stock |
10 | 30 | 3.7 | 13.69 | stock |
14 | 38 | 3.7 | 13.69 | stock |
12 | 29.8 | 3.7 | 13.68 | stock |
7.24 | 18 | 3.7 | 22.81 | stock |
290 | 420 | 230 | 500 | stock |
90 | 400 | 35 | 23 | stock |
90 | 830 | 35 | 49 | stock |
160 | 570 | 230 | 500 | stock |
Heating Panel specifcations:
1Silicone heater is a flake heater which can be applied in many kinds of industries with features of fast heating and heating equally distributed and long service life.
2 Thin, lightweight heaters allow you to apply heat where it’s needed, reducing operating costs Etched-foil heating technology provides fast and efficient thermal transfer for increased throughput
3 Customized options (i.e. SMT components, flex leads and connectors) offer turnkey solutions to drastically reduce assembly time and increase productivity
4 Custom profiling gives uniform thermal performance of the heating output to improve processing yields and productivity
Typical Applications:
Medical diagnostic instruments: Heat sample trays, curettes, reagent bottles, etc.
Warm satellite components
Protect aircraft electronic and mechanical devices against cold at high altitudes
Stabilize optoelectronic components
Test or simulate integrated circuits
Enable cold weather operation of outdoor electronics such as card readers or LCDs
Maintain constant temperature in analytic test equipment
OEM&ODM:
1. If you dont like our packaging, we could do as your design or we redesign for you.
2. For the logo, we could do the silk printing and the laser printing.
3. For the products color, we could do as your panton color(PMS).
4. If you dont like our existing products and have your own idea, we could achieve it as your requirements.
Why choose us:
1. More than 18 new desigh products created by Outstanding design and development team each month.
2.1.0 standard of MIL-STD-105E Acceptable Quality Levels.
3. Strict quality control management,qualified rate of products 99.98%
4.Foucus on heating solutions over 10 years.
5.Our own factory, 82.6% used materials supplied by ourselves, maximum limit to reduce costs.
6.Welcome you send your QC to check the quality.
1.Retail gift box packing/Carton or pack as customers' requirement
2.Via express(DHL, FEDEX, UPS, TNT ETC), or by air, by sea or send to customers' warehouse in China
1 Joshy from USA(NOV 15,2014):
Very pleased!This was a great visiting!They are serious and they are indeed professional on heating solutions,they gave me a good answer ,and i look forward to long corperation with them ,and hope can get their continuous support.I would highly recommend it to anyone!
2 Robert brown from UK(Jan 8,2015):
We were very impressed with the visiting from the first contact was very effective and efficient in planning the details, in communicating
to us.The Staff did an excellent job in all respects,We would be happy to provide our positive views to any prospective customer and are sending this to our supplier.
3 Silvan Bauman from Switzerland(Oct 6,2015):
It was good to meet with you, Nina, finally.Ur engineer team impressed me deeply,and ur products really creative i got my answer satisfying I hope to be in touch with you in the future.
Q1.Are you manufacturer or trade company?
A:We are manufacturer of hot stone heating bag,hot stones massage, warm bamboo bars for spa massage,Ultrasonic stain remover,saddle heating cover,12v mobile Thermal Spa Heating Cap,Electric Heating Glove,Electric Heating Socks,Electric Heating Insole.
And heating elements as flexible kapton heating film,PET heating film,silicone/rubber heating mat/panel,PTC heater,infared mica heater,infrared epoxy heating panel,tubular heater,Cartridge heater,heating mats(cables)for snow melting.
Q2. What is the lead time?
A: Sample is 1-2 working days, mass production time is 6-8 working days for the order less than 5000 pcs if without any changing.
Q3. I don’t like your standard colors. Can I choose any color for the housings? If yes, any extra cost?
A: You can choose our available colors at present. We can also make panton PMS color as you like. MOQ is 500pcs/color and no extra cost.
Q4. Do you have any MOQ limit?
A: If you can accept our neutral packaging and generic porducts, there is no MOQ;
OEM MOQ is 500pcs for trial order.Please contact us directly to get latest news.
Q5: What is the packaging?
A: We provide neutral Gift box packaging, we also can make your own designed OEM packaging, the MOQ is 500pcs.
Q6. Can I have a sample even pre-production before I send you the order?
A: Yes, We can send you samples for your approval first.
Overseas Agent:
1. We are expanding our business in overseas markets.
2. If you have any interst to be our agent in your country/district, Pls feel free to contact us.